Reading The Operating Instructions Of The Software Applications; Software Application Uninstallation - Panasonic VDR VDR-D220 Operating Instructions Manual

With a computer
8
Click [Finish].
Windows 2000 only:
The detection of device will start, after which it
will take several minutes for the computer to
detect the device. When detecting the device is
complete, a message that prompts you to reboot
will appear:
Click [Yes].
The computer must be rebooted for the driver
to work.
∫ If any trouble has occurred while installing
DVD-RAM Driver:
When [Block] is selected in the [Driver Signing
Options] in the [System Properties], the
installation procedure will not complete. Select
[Warn] and try again.
To check and change the setting, select [start] #
([Settings] #) [Control Panel] # ([Performance
and Maintenance] #) [System] and select [Driver
Signing] of the [Hardware] tab.
∫ About the [RAMASST] support tool:
[RAMASST] is a support tool for Windows XP
that disables the drive's CD writing function so
that data can be written from a computer to a
DVD-RAM.
When you install the DVD-RAM Driver,
[RAMASST] is automatically installed and
displayed in [Startup].
Reading the operating
instructions of the software
applications
For details on how to use the software
applications, read the PDF instructions.
≥ You will need Adobe Acrobat Reader 5.0 or
later to read the PDF operating instructions.
(l 83)
86
LSQT1146
∫ DVD-RAM Driver
Select [start] # [All Programs (Programs)] #
[DVD-RAM] # [DVD-RAM Driver] # [Using
DVD-RAM disc].
Software application
uninstallation
Follow the steps below to uninstall any software
applications that you no longer require.
1
Select [start] # ([Settings] #)
[Control Panel] # [Add or
Remove Programs
(Applications)].
2
Select the software application to
be deleted, then click [Change/
Remove] ([Change or Remove] or
[Add/Remove]).
≥ Proceed with the uninstallation by following the
on-screen instructions.
≥ After uninstalling the software, be sure to
reboot the computer.