Panasonic VDR VDR-D220 Operating Instructions Manual page 104

Others
Problem
The DISC EJECT lever
does not work when the
unit is connected to the
computer.
Cannot write to DVD-
RAM.
Cannot format a disc with
the DVD-RAM Driver.
When the USB cable is
disconnected, an error
message will appear on
the computer.
104
LSQT1146
≥ The DISC EJECT lever does not work after the unit is
connected to the computer.
# Use Windows Explorer to right-click the drive icon and execute
[Eject]. Or use the software's eject button to eject the disc.
≥ (Windows XP only) Deleting the unit name from the Device
Manager and then connecting the unit and the computer again
can improve this. Follow the steps below. Before proceeding,
be sure to remove the disc from the unit.
1) Select [start] # ([Settings] #) [Control Panel] # ([Performance
and Maintenance] #) [System].
2) Click the [Hardware] tab, then click [Device Manager].
3) Right click [MATSHITA DVD-RAM LMXK1987 USB Device]
displayed at [DVD/CD-ROM drives] and then select [Uninstall].
4) When erasing is complete, reboot the computer. The computer
will automatically recognize the unit again.
≥ To disconnect the USB cable safely, double-click the
in the task tray and follow the instructions on the screen.
Check points
icon