Messages - Panasonic SDR-S7P/PC Operating Instructions Manual

Sd video camera
Table of Contents

Advertisement

Others
Message
CANNOT RECORD.
NO DATA.
THIS CARD CANNOT
RECORD IN VIDEO
MODE.
CHECK CARD.
CARD LOCKED.
CARD FULL.
SCENE NUMBER IS
FULL
CANNOT RECORD.
THE NUMBER OF
PROGRAM IS FULL.
CARD DOOR OPENED.
ERROR OCCURRED.
RECORDING IS
STOPPED.
EXIT THE MENU THEN
CHANGE TO MANUAL
MODE.
CANCEL MAGICPIX
MODE.
88
VQT1R00
3

Messages

Writing on the SD card failed.
Neither motion pictures nor still pictures are recorded
on the SD card.
Data is recorded on the SD card, but if this message
appears, the card may be unstable.
Shut power off and turn back on.
An 8 MB or 16 MB SD card cannot be used in video
recording mode.
The SD card is not supported or cannot be recognized
by the unit.
The SD card is write-protected. (P.19)
The SD card cannot be recorded on because it is full
or the numbers of scenes or numbers of scenes for
the date has reached the maximum. Either delete
unnecessary scenes or insert a new card. (P.56)
Close the card/battery door.
● Use a Panasonic SD card or other SD card
applicable for motion picture recording. (P.18)
● If this message appears when an applicable
card is used, it is recommended to format the
card. Formatting deletes all data on the SD card.
Therefore, save data on a computer or other device
before formatting the card.
Functions that cannot be used simultaneously were
selected. (P.95)
What to check

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdr-s7kSdr-s7sSdr-s7rSdr-s7aSdr-s7Sdr-s7p ... Show all

Table of Contents