Panasonic SDR-H80 Operating Instructions Manual page 100

With other products
Problem
The sound does not play
back properly when a
DVD disc that has been
copied using the DVD
burner is played back.
With a PC
Problem
When connected by the
USB cable, this unit is not
detected by the PC.
When the USB cable is
disconnected, an error
message will appear on
the PC.
The DVD COPY function
will not start.
I cannot copy motion
pictures using the
DVD COPY function.
It takes a long time to
create a DVD.
The DVD player cannot
play back the discs I have
created using VideoCam
Suite.
100
LSQT1484
≥ When the scenes recorded on an SD card by setting
[AUDIO REC] to [MPEG] are copied to a DVD disc using
the DVD burner and then played back with any other
devices, sound may not play back properly.
In this case, record scenes by setting [AUDIO REC] to
[DOLBY] and then copy to the disc. Or use the software
supplied with this unit to copy the scenes.
≥ Close the menu screen before connecting the USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 80)
≥ Disconnect the USB cable, turn the unit off then on and
then reconnect the USB cable.
≥ To disconnect the USB cable safely, double-click the
( ) icon in the task tray and follow the instructions on the
screen.
≥ To create DVD-Video discs using the DVD COPY function,
you need to install VideoCam Suite from the supplied CD-
ROM to your PC. (l 83)
≥ Once motion pictures have been copied using the
DVD COPY function, they cannot be copied a second or
subsequent time.
Import the motion pictures onto the PC, and then write them
on the DVD disc.
≥ Creating a DVD may take some time even if the size of the
motion picture files are small.
≥ To playback a DVD disc created using VideoCam Suite, the
player must support playback of that DVD disc. (Refer to
the operating instructions of the player.)
Check points
Check points