Camera Power Connections; Connecting Devices - First Alert DVRA0405 User Manual

PRODUCT OVERVIEW
CAMERA AND POWER CONNECTIONS
Installing Cameras
Mounting Cameras and Running Cable
Select the position for the camera and secure the camera stand. Screw the camera onto the stand. Adjust camera to the proper
view angle. Make sure the lens is upright relative to the subject. Tighten the thumb bolt. First Alert cameras can be either ceiling
or wall mounted by simply reversing the camera stand mounting. See "Camera Orientation" Info box. Holes are provided on
both the top and bottom of the camera housing to accommodate most mounting requirements. Run cable from camera to DVR
location. See Information box below on "Longer Cable Runs".
Camera - Wall Mounted
Step 2... Connecting Devices
Follow this diagram to make device connections. Note, some devices are not
included with this kit. See "What's in the Box" for included devices.
Back Panel
Connect Mouse &
USB Drive
Smartphone
through Mobile
Internet Setup
(Smartphone Not
included)
Video to DVR
Channels 1-8
RCA Audio Out to
Powered Speakers
(Not included)
RCA Audio In from Audio
Cameras or Powered
Microphone
(Not included)
4 Way Splitter
Power to Camera
Video to Camera
DVR are required, you will need to upgrade to RG59 Coax cable. We
provide several lengths up to 300 feet. In addition, if you need to run
cable for in-wall installations, then you may require fire rated cable,
FT-4/CMR UL approved for in-wall installations.
AV Cable: BNC/DC Power
(1 per Camera)
Power
from 120V
Page 12
Camera Orientation
It's important the camera is mounted correctly to
ensure the image is not upside down as the cam-
era lens can only be positioned one way.
Longer Cable Runs
Longer cable runs may require an upgrade to
RG59 Coax cable. First Alert kits ship with eco-
nomical AV cable that is designed to work well up
to the length of cable provided, usually around
60 feet. If longer distances between camera and
VGA to PC Monitor or TV
BNC to Security Camera Monitor
(Not included)
RJ45 Ethernet to
Router and Internet
PTZ & Alarm Connections
(Cameras not included)
Power to DVR
DC Converter - 12V
Splitter -
4/8 camera
1 Power