AW3 SM-EN 2011.3.31 2:55 PM 페이지53 in
DISASSEMBLY AND REASSEMBLY
3-29) Machine Compartment
Part Name
Motor Fan
How To Do
1. Unscrew 6 screws of cover
compressor.
2. Remove 1 screw and disengae
the housing connector. (Refer to
the picture)
3. Remove the hooker of support
circuit motor by lifting the hooker
up and pulling it out.
4. Remove the screw with a flat-
blade screwdriver.
(Refer to the picture)
5. Remove the motor fan by pulling
the fan out while graping the
motor part.
(Refer to the picture)
6. Unscrew 2 screws fixed in the
motor.
7. Remove the hook of the motor
cover with a flat-blade (-)
screwdriver and then remove
the motor.
53
Descriptive Picture