Table of Contents
Advertisement
Dual band Taishan level 3 debug rev 1.0
Taishan:
START
NO
VIBRACALL
Put the phone in
NO
Test mode and digit
Check U800
1590#
NOTE1 or Faulty
Is there 2,7Volt on
pin1 of U501 ?
YES
Check U501 (there must be
about 1,3Volt on pin4) and
J5001/2 contacts.
NOTE1 : check if any components mentioned are
correctly positioned , have not dry joint and aren't
not phisically damaged .
Page 17
- MOTOROLA CONFIDENTIAL PROPRIETARY -
Advertisement
Table of Contents
