Panasonic PV-GS120 Operating Instructions Manual page 55

≥The [PRINT] Indication does not appear when
the card is not inserted in the Camcorder. (You
cannot print pictures.)
≥When the [PRINT] Indication keeps blinking
(more than about 1 minute), the Camcorder and
the printer are not connected properly. Connect
the cable again or check the printer.
≥When the Camcorder and the printer are
connected in the Tape Recording/Playback
Mode, the [WEB ] or the [WEB
Indication may appear on the LCD Monitor.
However, images cannot be printed.
3
Select the desired picture and press the
(17)
[ENTER] Button
STILL
(17)
ENTER
s i
FADE
≥Images cannot be printed when they are
displayed in Multi-screen.
4
When printing with date:
Set [PICTURE PLAYBACK MENU] >>
[PRINT] >> [DATE] >> [ON].
STILL
ENTER
s i
FADE
(14)
MENU
≥You cannot set date printing when the printer
does not support it.
≥Proceed to the next step if you do not need
date printing.
5
Set [PICTURE PLAYBACK MENU] >>
[PRINT] >> [THIS PICTURE] >> a desired
paper size.
STILL
ENTER
s i
FADE
(14)
MENU
≥You cannot set a paper size which is not
supported by the printer.
6
Press the [5] Button
(19) to select a desired number of prints.
STILL
ENTER
s i
FADE
(19) (16)
≥You can set the number of prints up to 9.
Editing Mode
]
.
(16)
or [6] Button
7
Press the [ENTER] Button
STILL
(17)
ENTER
s
FADE
If you want to stop printing halfway
Press the [∫] Button
≥Do not operate as follows during printing,
pictures cannot be printed properly.
≥Disconnecting the USB cable
≥Removing the Card
≥Switching the operation mode
-55-
(17) .
i
(18)
.