Panasonic Palmcorder Multicam PV-DV73 Operating Instructions Manual page 73

PHOTOVU/MPEG4 Movie Messenger™ System (i.LINK)
3
Normal
6
STOP
To capture Still images
[When selecting Detail]
3
Click on [Detail].
4
Click on [Still Capture] at the point
you wish to capture images.
• The screen to select frames is
displayed.
5
Select the frame for the segment to be
captured select frames, and click
[Select].
• Repeat steps
capturing images.
• Captured Still images are saved to
the PC, and you can playback the
saved images on the View Manager.
(P. 63)
3, 3
Detail
4
Movie
Capture
4
Still
Capture
DV
5, 7, 5
Select
4 and 5 to continue
[When selecting Detail]
Note
• Detail mode lets you specify the start and
end frames for the video segment you
want to capture and save.
3
Click on [Detail].
4
Click on [Movie Capture] at the
point where you wish to capture a
Motion image.
• The screen to select the start frame is
displayed.
5
Select the start frame for the
segment to be captured select one
frame, and click [Select].
• "Now Searching..." is displayed, and
the DV tape is rewound to the point
at which the capture was started.
• "Now capturing a movie." is
displayed.
6
Click on [Stop] to end capture.
• The screen to select the end frame is
displayed.
7
Select the end frame for the segment
to be captured, select one frame, and
click [Select].
• "Saving a file..." is displayed.
• The image is transferred to the PC in
real time.
To capture Still images
[When selecting Normal]
3
Click on [Normal].
4
Click on [Still Capture] at the point
you wish to capture an image.
• Repeat step 4
images.
• Captured Still images are saved to
the PC, and you can playback the
saved images on the View Manager.
(P. 63)
to continue capturing
73