Panasonic Palmcorder Multicam PV-DV73 Operating Instructions Manual page 112

Electronic Viewfinder/LCD Monitor Indications
CAMERA/VCR Mode
WARNING Indication (pp. 98, 99)
k
The warning displays appear in the
EVF and the LCD monitor.
Counter/Time Code
l
The indication switches as shown
below when the desired "C. DISPLAY"
mode is selected from the menu.
(Menu OSD: pp. 107, 109)
Linear Time Counter Memory Counter
Time Code
Memory Counter M 0:00.00
The Palmcorder will stop whenever it
reaches the point where the counter was
previously set to M 0:00.00 during audio
dub, fast forward, or rewind.
Time Code 0h00m00s00f
The Palmcorder calculates and displays
exactly where you are on any tape in terms
of hours, minutes, seconds, and frames
(30 frames = 1 second).
• This display cannot be reset.
112
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
k l
IMPORTANT NOTE:
• Display must be set to ALL for MF, AE,
W.BALANCE or BACK LIGHT indications
to be displayed on the EVF or LCD Panel
when selected.
• C.RESET does not work when
C. DISPLAY is set to T.CODE.
m
Tape Mode Indications
REC
PHOTO
PAUSE
R
CHK
FF
REW
BLANK
SEARCH
m
Recording.
PhotoShot recording.
Paused during recording.
Playback.
Still.
Slow (forward).
Slow (reverse).
Frame Advance (forward).
Frame Advance (reverse).
Repeat Playback.
Recording Check.
Fast forward.
Rewind.
FF Search.
REW Search.
Blank Search.
Index Search.