D-Link AirPremier N DAP- 2590 User Manual page 41

DAP-590 User's Manual
Automatic:
Protocol:
Host 1 IP Range:
Host 1 Port Range:
Host 2 IP Range:
Host 2 Port Range:
D-Link AirPremier N Dual Band PoE Access Point
When enabled, this option causes the access point to automatically
attempt to prioritize traffic streams that it doesn't otherwise recognize,
based on the behavior that the streams exhibit. This acts to
de-prioritize streams that exhibit bulk transfer characteristics, such
as file transfers, while leaving interactive traffic, such as gaming or
VoIP, running at a normal priority
Name:
Enter a name for the new QoS rule in the field provided.
Priority:
Use the pull-down menu to select the desired priority: Background
(BK), Best Effort (BE), Video (VI), or Voice (VO).
Use the pull-down menu to choose the appropriate protocol used by
the messages: Any, TCP, UDP, Both, IMCP, or Other.
The rule applies to a flow of messages for which one computer's IP
address falls within the range set here.
The rule applies to a flow of messages for which host 1's port number
is within the range set here when the Protocol is set to TCP, UDP,
or Both.
The rule applies to a flow of messages for which the other computer's
IP address falls within the range set here.
The rule applies to a flow of messages for which host 2's port number
is within the range set here when the Protocol is set to TCP, UDP,
or Both.
Using the Configuration Menu
41