BMW G 650 GS Sertão Rider's Manual page 80

8
78
Insert ABS sensor into the
bore and install screw 1. Insert
washer if one was installed.
Remove rear wheel
z
Make sure ground is level and
firm and place motorcycle on a
suitable auxiliary stand.
Detach the screw 1 and extract
the wheel speed sensor from
its bracket; a washer may also
be installed at this location.
Remove the nut 2, applying
counterpressure of the left
side.
Loosen adjusting screws 3 on
left and right by turning coun-
terclockwise.