Resetting The Sunny Home Manager - SMA sunny home manager Installation Manual

SMA Solar Technology AG
10.6 Resetting the Sunny Home Manager
The reset button is located in a small aperture on the bottom of the Sunny Home Manager.
Depending on how long you hold down the reset button, the Sunny Home Manager is partially or
completely reset.
Duration Result
1 to 5 s The network settings of the Sunny Home Manager are reset.
5 to 10 s The Sunny Home Manager is completely reset:
• All settings of the Sunny Home Manager are deleted.
• All cached system data (energy values, events, etc.) are
deleted.
• The Sunny Home Manager redetects the BLUETOOTH
devices within range.
• If Plugwise radio-controlled sockets are present, all
Plugwise radio-controlled sockets will be deleted in the
Sunny Home Manager and must be redected with the
Sunny Home Manager:
• The Sunny Home Manager must be registered again in
Sunny Portal (see Section 10.7, page 76).
Installation Manual
– Check whether the Plugwise radio-controlled sockets
are displayed without the locked symbol in the
Plugwise app.
☑ The Plugwise radio-controlled sockets are displayed
without the locked symbol in the Plugwise app.
✖ The Plugwise radio-controlled sockets are displayed
with the locked symbol?
The Plugwise Stretch was not available during the
resetting of the Sunny Home Manager. The Plugwise
radio-controlled sockets are locked and could not be
detected by the Sunny Home Manager.
• Reset the Plugwise Stretch (see manufacturer's
documentation).
– Detect the Plugwise radio-controlled sockets with the
Sunny Home Manager (see Section 8.1, page 52).
10 Troubleshooting
Status of the sta-
tus LED and the
energy con-
sumption LED
Flashing orange
intermittently
Flashing red inter-
mittently
HoMan-IA-en-20 75