Mounting The Sunny Home Manager On The Top-Hat Rail - SMA sunny home manager Installation Manual

6 Mounting
3. Drill the holes (diameter: 6 mm).
4. Insert the screw anchors into the holes.
5. Screw in the screws leaving approximately 6 mm protruding from the wall.
6. Hook the Sunny Home Manager onto the
screws. Ensure that the heads of the screws are
engaged in the holes at the back of the
Sunny Home Manager.
6.4.2 Mounting the Sunny Home Manager on the Top-Hat Rail
Requirement:
☐ The top-hat rail must be firmly attached to the wall.
Procedure:
1. Press the Sunny Home Manager with the upper
retainers into the upper edge of the top-hat rail.
2. Hook the lower retainers into the lower edge of
the top-hat rail.
40 HoMan-IA-en-20
SMA Solar Technology AG
Installation Manual