Color Space; Color Temp - Panasonic BT-LH2550 Menu Information

Main Menu
(continued)
VIDEO CONFIG
Sub menu Settings
GAMMA
STANDARD
*1*2
SELECT
STDIO/PST
FILM

COLOR SPACE

SMPTE-C
EBU
ITU-709
WIDE1
WIDE2
WIDE3

COLOR TEMP.

USER0 - 63
D93
D65
D56
VAR1
VAR2
VAR3
SHARPNESS
HIGH
*2
LOW
MODE
*2
0 - 30
SHARPNESS H
*2
0 - 30
SHARPNESS V
*1 Changes are not reflected to a still image in the main window in the split-screen display of the "TWO WINDOW"
function.
*2 These functions are not available when "RGB-COMP." under "YP
selected in the "INPUT SELECT" menu (
COMP" or "DVI-COMP" is selected. Selecting WIDE1 to 3 for "COLOR SPACE" produces the gamma curve
fixed to that "COLOR SPACE."
*3 The following sharpness values are available and the settings for the selected input signal is displayed.
Adjustment status during selection appears at the bottom right of the screen.
1) VIDEO system input (VIDEO) (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H/V: 0)
2) HD for any other input (the factory defaults are SHARPNESS MODE: HIGH and SHARPNESS H/V: 0).
3) SD for any other input (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H/V: 0).
*4 Selecting "VAR1", "VAR2" and "VAR3" engages the WB adjustment mode (
*5 To select USER0 - 63,
1) Press [ENTER] ("USER" changes to blue).
*7 Factory default setting: SMPTE-C (U.S.A. and Canada), EBU (other countries)
26
Description
Selects gamma curve. The gamma curve in the sub-window can be
set in the split-screen display and sub-window display (single screen)
of the "TWO WINDOW" function.
<STANDARD> Standard mode
<STDIO/PST> Color emphasis mode (a mode that approximates CRT
<FILM>
The
is selected.
*7
Sets the color space. The color space in the sub-window can be set in
*7
the split-screen display and sub-window display (single screen) of the
"TWO WINDOW" function.
<SMPTE-C> SMPTE-C standard
<EBU>
<ITU-709>
<WIDE1>
<WIDE2>
<WIDE3>
*5
Selects color temperature. Both the main window and sub-window can
be set up in the split-screen display of the "TWO WINDOW" function.
<USER 0 - 63> Adjustable settings 0 - 63 (equivalent to a color
<D93> Equivalent to a color temperature of 9,300K
<D65> Equivalent to a color temperature of 6,500K
<D56> Equivalent to a color temperature of 5,600K
<VAR1> WB adjustment mode
<VAR3> WB adjustment mode
USER20 is approximately 5000 K and USER33 is approximately 6300 K.
*3
Selects the width of outline correction edge. Both the main window
and sub-window can be set up in the split-screen display of the "TWO
WINDOW" function.
<HIGH> Thin edge
*3
Sets horizontal outline correction. The item display moves to the lower
part of the screen during adjustment. Both the main window and sub-
window can be set up in the split-screen display of the "TWO
WINDOW" function.
*3
Sets vertical outline correction. The item display moves to the lower
part of the screen during adjustment. Both the main window and sub-
window can be set up in the split-screen display of the "TWO
WINDOW" function.
page 36). The gamma curve is set to STANDARD when "RGB-
Underlined values indicate factory defaults.
display capability suitable for studio or postproduction
application)
Film mode (For VARICAM use)
mark appears at the top left of the screen when "FILM"
EBU standard
ITU-R BT. 709 standard
Sets the gamma curve to 2.2 in wide color gamut (using
Adobe color space) mode.
Sets the gamma curve to 1.8 in wide color gamut (using
Adobe color space) mode.
Sets the gamma curve to 2.6 in wide color gamut (using D-
Cinema color space) mode.
temperature range of 3,000 - 9,300K)
*4
<VAR2> WB adjustment mode
*4
<LOW> Wide edge
P /RGB" or "DVI-COMP." under "DVI-D" is
B R
2) Use [ , ] to select 0 - 63 and press [ENTER].
page 28).
*4