Sd Memory Card Status Display; Confirmation Of Metadata Upload; Video Encoder Card Status Display; (Optional) - Panasonic AJ-SPC700 P Operating Instructions Manual

Chapter 6 Manuipulating Clips with Thumbnails
(continued)

6-17-3 SD memory card Status Display

The status display enables a confirmation of the SD memory
card formatted condition, available memory capacity etc.
From the menu bar, select PROPERTY DEVICES SD
CARD.
If the format is compatible with SD standards, the message
"SD STANDARD: SUPPORTED" is displayed.
If the format is not compatible with SD standards, the
message "SD STANDARD: NOT SUPPORTED" is
displayed. If this is the case, writing or reading will not be
successful. Format the card with the AJ-SPC700P.For more
on formatting SD memory cards, see [6-15 Formatting SD
memory cards].

6-17-4 Confirmation of Metadata Upload

The contents of the metadata upload file that is read from
the SD memory card can be checked.
From the menu bar, select PROPERTY DEVICES
META DATA. The following screen appears:
For more information on each item, see [6-12 Setting of Clip
Meta Data].
The META NAME is the meta data name written in the meta
data upload file, and is not recorded in the clip.

6-17-5 Video Encoder Card Status Display

(optional)

Attaching the video encoder card (AJ-YAX800G, optional),
select PROPERTY DEVICES PROXY from the menu
bar.
The number of the slot in which the video encoder card is
inserted is displayed.
90