Menu Displays In The Viewfinder Screen; Menu Configuration; Setting Menu Options - Panasonic AJ-SPC700 P Operating Instructions Manual

Chapter 4 Adjustments and Settings for Recording
4-6 Menu Displays in the
Viewfinder Screen

4-6-1 Menu Configuration

USER MENU is factory-set. The menu can be
USER MENU:
configured to suit your preferences by
specifying each option according to your
purposes and frequency of use, through the
<USER MENU SELECT> screen, which is
accessible from the MAIN MENU page.
For more information, see [4-6-3 Selecting
Options for USER MENU].
To display USER MENU, press the MENU
button.
Allows you to set all options on the settings
MAIN MENU:
menu.
This menu
structure, layered according to purposes and
frequency of use.
To display MAIN MENU, press the MENU
button for three seconds or longer.
Provides options which may be needed if
OPTION MENU:
functions are added in the future.
To display OPTION MENU, hold down the
LIGHT button and press the MENU button.
For more information, contact your distributor.
MENU button
JOG dial button
has a category-by-category
LIGHT button

4-6-2 Setting Menu Options

The menu options are set with the MENU and JOG dial
buttons.
The menu comprises main menu, sub-menus and options
menus.
The data specified through menu options are written and
saved in the internal memory of the AJ-SPC700P.
This section describes how to set options in MAIN MENU.
The other menus can be configured in the same manner (the
method of displaying the menu screen depends on the
particular menu).
<Note>
When the AJ-SPC700P is in thumbnail mode, the viewfinder
displays "THUMBNAIL OPEN", disabling navigation through
the menu.
1
Press the MENU button for three seconds or longer.
The MAIN MENU screen appears, together with its
options.
SYSTEM SETTING:
This option is used to specify recording signal,
recording system, etc.
This option is used to fine-adjust images while
PAINT:
monitoring the output waveform of the
camera, using
Normally, this adjustment requires assistance
from a video engineer.
This menu option may be set with an external
remote controller, and is useful when using
the AJ-SPC700P without a sound recordist.
Used to select the information items to be
VF:
displayed in the viewfinder screen.
CAM OPERATION:
Used to change settings according to the
conditions for the subject.
MAIN OPERATION:
Used to specify recording-related items, such
as audio settings, time code, battery and P2
card remaining amounts.
Used to specify file-related items such as SD
FILE:
memory card reading/writing and lens file
settings.
MAINTENANCE:
Used to specify maintenance-related items.
USER MENU SELECT:
Used to edit USER MENU.
(continued)
the waveform monitor.
43
4