U-Line 3024ZWC Wine Captain User Manual page 21

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
The following chart lists modes which include the quick
chill feature and the time which quick chill will run.
Mode
Red Wine
White Wine
Sparkling Wine
Beverage/Drinks
To initiate quick chill:
1. Press to select the desired zone, left or right.
2. Press to select the desired mode setting.
3. Press until the temperature set point reads "Quick".
The quick chill feature will then begin for the period of
time dictated by the mode type. To cancel quick chill,
simply select a set point other then "quick".
NOTE: There may be a delay before quick chill is
activated. If the opposite zone is currently in a cooling
cycle while quick chill is selected, the cooling cycle on the
opposite zone will first be completed.
NOTE: Please note that when quick chill is activated, the
zone opposite the active quick chill zone will not return to
a cooling cycle until quick chill is complete. If storing
product in the opposite zone it is important to limit the
number of times the door is opened in the zone not
currently under quick chill.
Run Time
Not Available
1 Hour
1 Hour
4 Hours
INTERIOR LIGHTING
Your U-Line 3000 Series unit uses a state-of-the-art LED
lighting system. The dual zone's lighting can be
independently controlled or set as a group.
Up
Zone Indicator
LIGHTING
ON WITH DOOR
3036 Model Display Shown
Down
1. To begin, press to enter the lighting menu.
2. The unit initially defaults to control the lighting in both
Zones simultaneously. To select a single zone press
. Notice the arrows on top of the display changing
state. Pressing once will select the left side zone,
pressing it again will select the right side zone, and
pressing it a third time will select both zones.
3. Press or to cycle through each available
brightness setting (Low, Medium or High).
4. Press to cycle through each available timer setting.
Selections include "On With Door", "On 3 Hours", "On 6
Hours", or "On 24 Hours".
5. To exit, press or simply wait for the menu to time
out.
ERROR NOTIFICATION
The 3000 model series continuously monitors a series of
inputs and parameters to ensure proper and efficient
operation of your unit. Should the system detect a fault,
an error notification will be displayed on the user
interface. See below for a list of errors.
u-line.com
Zone Toggle
Zone Indicator
Select
U-SELECT LIGHTING
LEVEL
HIGH
Power
U-Select Lighting
Control Operation 3