Contents Of Simulations - Sharp AL-1640 Service Manual

4. Contents of simulations

Main Sub
Contents
code code
3 11 Shifter Home Position
Check
<Used only in the
AL-1670>
50 18 Duplex memory reverse
position adjustment
<Not used>
19 Duplex rear edge void
adjustment
<Used only in the
AL-1620/1621 and
AL-1650/1670>
Details of operation
Used to drive the shifter motor
Key operation
Feed: Exposure up key
Return: Exposure down key
Moved to Home Position: Magnification ratio display key
After completion of warmup, shading is performed and currently set
value is displayed
Key operation
Memory reverse position adjustment value:
Copy quantity keys
After completion of warmup, shading is performed and currently set
value is displayed.
Key operation
Adjustment mode select:
Exposure mode select key
Set value: Copy quantity
keys
6 – 2
Display
Auto: SPF/R-SPF rear edge void
Manual: R-SPF off center <Not used>
Photo: R-SPF lead edge void
<Not used>
AL-1670
Initial
Set range
value
1 ∼ 99
58
1 ∼ 99
50