Audio Settings; Select A Preset Equalizer; Store Your Own Sound Settings - JVC KD-R971BT Instruction Manual

AUDIO SETTINGS

Select a preset equalizer

Press repeatedly.
(or)
Press , then turn the volume knob within 5 seconds.
Preset equalizer:
FLAT (default)/ HARD ROCK / POP / HIP HOP / R&B / JAZZ / CLASSICAL / USER

Store your own sound settings

1 Press and hold to enter EASY EQ setting.
2 Turn the volume knob to select an item, then press the knob.
Refer to [EASY EQ] for setting and the result is stored to [USER].
• To return to the previous setting item, press
• To exit, press .
Other settings
1 Press and hold .
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3 Repeat step 2 until the desired item is selected/activated or
follow the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
16
EQ SETTING
EQ PRESET
EASY EQ
PRO EQ
62.5HZ
LVL –09 to +09 (00): Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you want to adjust.)
BASS EXT ON: Turns on the extended bass. ; BASS EXT OFF: Cancels.
.
100HZ / 160HZ / 250HZ / 400HZ / 630HZ / 1KHZ / 1.6KHZ / 2.5KHZ / 4KHZ / 6.3KHZ /
10KHZ / 16kHZ
LVL –09 to +09 (00): (Refer above)
Q FACTOR
Q 1.35/ Q 1.50/ Q 2.00: Adjust the quality factor.
AUDIO
BASS BOOST
LOUD
.
* 1
Displayed only when [SUB.W] is set to [ON]. ( 17)
* 2
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W]. ( 17, 18)
* 3
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or [SUB.W/
SUB.W]. ( 17, 18)
Select a preset equalizer suitable to the music genre. (Select [USER] to use
the settings made in [EASY EQ] or [PRO EQ].)
FLAT / HARD ROCK / POP / HIP HOP / R&B / JAZZ / CLASSICAL / USER
Adjust your own sound settings. The settings are stored to [USER].
• The settings made may affect the current settings of [PRO EQ].
SUB.W SP * 1 * 2
: 00 to +06
SUB.W * 1 * 3
: –50 to +10
BASS LVL: –09 to +09
MID LVL: –09 to +09
TRE LVL: –09 to +09
Adjust your own sound settings. The settings are stored to [USER].
• The settings made may affect the current settings of [EASY EQ].
+01 — +05: Selects your preferred bass boost level. ; OFF: Cancels.
01 / 02: Boosts low or high frequencies to produce a well-balanced sound at
low volume. ; OFF: Cancels.
Default: XX
(Default: 03
00
00
00
00)