Cleaning And Maintenance; Protecting The Environment - Black & Decker DUSTBUSTER DUO FV7201 Quick Start Manual

Table of Contents

Advertisement

E N G L I S H
If this does not solve the problem,
please contact your local
Black & Decker repair agent.
Make sure the battery is fully
charged.
If the battery cannot be
charged, check if the charger
is plugged in correctly and
the mains is working. Make
sure the on/off switch is in the
off position.

CLEANING AND MAINTENANCE

Regularly clean the filters.
Cleaning the dust bowl and
filters (fig. I - M)
The filters are re-usable and
should be cleaned regularly.
Press the release button (2) and
remove the dust bowl (3) (fig. I).
Remove any dust from the
dust bowl (fig. J).
Brush any loose dust off the
filters.
Twist the filters (17 & 18)
clockwise to release and take
them off the appliance (fig. K).
Wash the filters in warm,
soapy water and wash the
bowl if necessary (fig. L).
Make sure the dust bowl and
filters are completely dry.
Refit the filters, locking them
into place by twisting
counterclockwise.
Refit the dust bowl onto the
appliance. Make sure the dust
bowl clicks into place.
Important! Optimum dust
collection will only be achieved
with clean filters and an empty
dust bowl.
If dust begins to fall back out of
the appliance after switching it
off, this indicates that the dust
bowl is full and must be emptied.
Never use the appliance
without the filters.
8
Do not immerse the
appliance in water (fig. M).
Replacing the filters (fig. I & K)
The filters should be replaced
every 6 to 9 months and
whenever worn or damaged.
Replacement filters are available
from your Black & Decker dealer
(cat. no. VF20).
Press the release button (2)
and remove the dust bowl (3)
(fig. I).
Twist the filters (17 & 18)
clockwise to release and take
them off the appliance (fig. K).
Take the new filters and place
the soft filter into the hard
filter.
Fit the filters, locking them
into place by twisting
counterclockwise.
Refit the dust bowl onto the
appliance. Make sure the dust
bowl clicks into place.
PROTECTING THE
ENVIRONMENT
Tools
Black & Decker provides a
facility for recycling
Black & Decker products
once they have reached the
end of their working life.
This service is provided free
of charge. To take advantage
of this service please return
your product to any
authorised repair agent who
will collect them on our
behalf.
You can check the location of
your nearest authorised repair
agent by contacting your local
Black & Decker office at the
address indicated in this manual.

Advertisement

Table of Contents
loading

Table of Contents