Panasonic AG-TL950 Operating Instructions Manual page 24

4 ON-SCREEN/MENU SWITCHES
4-7 Contents of Menu Switches
[ ]: Factory setting • The lower section in the items and set values columns shows what's on the VCR's display.
Screens Items
VIDEO MODE QUASI-V
(VCR's display)
ViD 3
VTR MODE
HIGH DENSITY [OFF]
REC
VTR 1
MEMORY
STOP
VTR 2
EXT TIMER
REC
VTR 3
AUTO REC
CHECK
VTR 4
AUTO REW
VTR 5
REPEAT PLAY
VTR 6
24
Set values
[OFF] Sets whether or not the V. pulse is added during ordinary playback
ON (2H and 6H modes).
OFF: QUASI-V is not added. Normally set to this position.
OFF
ON: QUASI-V is added.
ON
• When a camera synchronized with the power supply is switched with
a switcher, the picture may be distorted at the switching point. In
this case, set this switch to "ON". This locks the monitor, preventing
the picture distortion at switching points (only in the 2/6H mode).
• V. pulse is always added in the Still mode and Timelapse mode.
Sets the mode during timelapse recording.
ON OFF: Records in the normal timelapse mode (timelapse recording with
the SP heads).
OFF
ON: Records in the HDR timelapse mode (timelapse recording with
ON
the EP heads). Refer to page 28.
Sets whether or not the counter memory function is activated.
[OFF]
OFF: The counter memory function is not activated.
ON
ON: The counter memory function is activated.
OFF
When the tape reel counter value reaches 0000 in the FF/REW
ON
mode, the VCR enters the Stop mode automatically.
* The counter memory function is not available during repeat recording/
playback, auto REW, alarm search, alarm scan and date/time search.
[OFF] Enables or disables automatic external timer recording or automatic
ON restart of recording after a power failure.
OFF: External timer recording or automatic recording after power
OFF
failure does not function regardless of whether power is supplied
ON
or not.
ON: Recording starts automatically when power is turned on.
[OFF] Sets whether or not Recording Check is automatically performed at the
ON beginning of a tape in the Repeat Recording mode.
OFF: Automatic recording check function is disabled.
OFF
ON: Automatic recording check function is enabled.
ON
[OFF] Sets whether or not the tape is rewound automatically when the tape
ON ends.
OFF: The tape stops at the end.
OFF
ON: The tape automatically rewinds and enters the Stop mode (auto
ON
REW).
* When the repeat recording/playback function is set to "ON", the
repeat function has priority.
* If the menu switch <TAPE END MODE> on the <ALARM/SENSOR
MODE> screen is set to "STOP", the Stop mode is engaged when
the tape ends even when there is an alarm or sensor recording. The
tape does not rewind.
[OFF] Enables or disables the repeat playback function.
OFF: The repeat playback function is disabled.
ON
ON: When the tape ends, it is automatically rewound and played back
OFF
again from the beginning.
ON
Function