Video Out; Vtr Function - Panasonic AG-DVC 200E Operating Instructions Manual

Menu contents
MAIN menu 1 of 2 (main menu)

VIDEO OUT

Setting
Item
options
VIDEO OUT MENU ON For selecting whether to output the menu
OFF screens to the VIDEO OUT connector.
ON: For the screens are output.
OFF:For the screens are not output.
<Note>
The VIDEO OUT MENU item is valid only
when ENC has been selected as the
VIDEO OUT setting.
VIDEO OUT SEL ENC For selecting whether the VTR signals or
VF VF signals are to be output from the VIDEO
OUT connector.
ENC: For VTR output
VG: For VF output
REMOTE SELECT LOCAL For selecting the VTR control.
1394 LOCAL: For control from the unit only
1394:

VTR FUNCTION

Setting
Item
options
UB MODE USER For selecting what is to be recorded in the
TIME user's bit area.
DATE USER: User setting (fixed)
TCG TIME: Real time value in hours/minutes/
DATE: Real time value in year/month/day/
TCG: Time code generator value
FIRST REC TC REGEN For selecting whether the TC REGEN
PRESET mode is to be established when recording
is started.
REGEN: The
PRESET: The regeneration mode is not
BACK TALLY ON For selecting whether the back tally lamp is
OFF to light.
ON: The lamp lights.
OFF:The lamp does not light.
FF/REW SPEED x32 For setting the fast forward and rewind
x64 speed.
x100 x32: 32 times normal speed
x64: 64 times normal speed
x100:100 times normal speed
AUDIO SAMPLING 32K For selecting the audio sampling frequency.
48K 32K: 32 kHz
" " indicates the factory setting.
Remarks
For control from 1394
Remarks
seconds
hours
regeneration mode is
established for the time code on
the tape.
established for the time code on
the tape. However, it is forcibly
established when the unit is
transferred from REC PAUSE to
REC.
48K: 48 kHz
34 (E)
VTR OPTION
Setting
Item
options
TIME STAMP REC For selecting whether to superimpose the date
NO-REC and time onto the camera's video recording.
REC:
NO-REC: For not superimposed
<Note>
When REC is selected, select the type of
date and time to be superimposed with the
TIME/DATE item of <VF DISPLAY 2/2>
sub-menu.
INTERVAL REC OFF For setting whether to perform intermittent
ON recording.
ONE-SHOT OFF:
ON:
ONE-SHOT: Recording is performed once for
REC TIME 00m05s For
: intermittent recording.
59m59s <Note>
The REC TIME setting is effective only
when ON or ONE-SHOT is set for
INTERVAL REC.
INTERVAL TIME 00h00m10s For setting the REC PAUSE time during
: intermittent recording.
23h59m59s <Note>
The INTERVAL TIME item is valid only
when ON has been selected as the
INTERVAL REC setting.
PAUSE TIME 3min For setting the time that is allowed to elapse
6min before REC PAUSE is replaced with SAVE.
10min
BATTERY
Setting
Item
options
BATTERY SELECT NiCd12 For selecting the type of battery used.
NiCd13 NiCd12: NP-1B made by Sony
NiCd14 NiCd13: TRIM13 made by Anton Bauer
TYPE A NiCd14: TRIM14 made by Anton Bauer
TYPE B TYPE A: AJ-BP490
TYPE B:Digital 14 V (Hitron 100) made by
TYPE A NEAR 11.0V For designating the type A voltage. When the
END : voltage set here is reached, the battery is
11.6V considered to have a minimal remaining
: charge, and a warning is displayed. A voltage
15.0V from 11.0 V to 15.0 V is used as the setting.
TYPE A END 11.0V For designating the type A voltage. When
: the voltage set here is reached, the battery
11.2V is considered to be flat, and a warning is
: displayed. A voltage from 11.0 V to 15.0 V
15.0V is used as the setting.
TYPE B NEAR 11.0V For designating the type B voltage. When the
END : voltage set here is reached, the battery is
13.0V considered to have a minimal remaining
: charge, and a warning is displayed. A voltage
15.0V from 11.0 V to 15.0 V is used as the setting.
TYPE B END 11.0V For designating the type B voltage. When
: the voltage set here is reached, the battery
12.5V is considered to be flat, and a warning is
: displayed. A voltage from 11.0 V to 15.0 V
15.0V is used as the setting.
Remarks
For superimposed
Not performed
Performed
the period set for REC TIME, and
then stops.
setting the recording time for
Remarks
Anton Bauer