Main Menu 2 Of 2 (Main Menu) - Panasonic AG-DVC 200E Operating Instructions Manual

Menu contents
MAIN menu 1 of 2 (main menu)
MIC/AUDIO
Setting
Item
options
FRONT MIC ON
POWER OFF
FRONT MIC –40dB
–50dB
–60dB
REAR MIC CH1 –40dB
–50dB
–60dB
REAR MIC CH2 –40dB
–50dB
–60dB
MIC LOWCUT CH1 ON
OFF
MIC LOWCUT CH2 ON
OFF
LINE CH1 +4dB
0dB
–6dB
LINE CH2 +4dB
0dB
–6dB
LENS SHADING
Setting
Item
options
LENS SELECT A
B
C
USER
SHADING (USER)
Remarks
ON: Phantom power is supplied to the
front microphone.
OFF:Phantom power is not supplied to the
front microphone.
For selecting the camera mic input level.
For setting the input mic level for the rear
jack AUDIO CH1 input.
For setting the input mic level for the rear
jack AUDIO CH2 input.
ON: The low-cut filter is set to ON for the
CH1 mic input.
OFF:The low-cut filter is set to OFF for the
CH1 mic input.
ON: The low-cut filter is set to ON for the
CH2 mic input.
OFF:The low-cut filter is set to OFF for the
CH2 mic input.
For selecting the rear jack AUDIO CH1 line
input level.
For selecting the rear jack AUDIO CH2 line
input level.
Remarks
For selecting the type of lens mounted on
the unit.
S18 a 6.7BERM4
A:
S18 a 6.7BRM4
S19 a 6.5BERM4
S19 a 6.5BRM4
YH18 a 6.7IRS
YH12 a 4.8IRS
YH18 a 6.7KRS/KP
B:
YH14 a 7.3KRS
YH12 a 4.8KRS
S14 a 7.5BRM4
S17 a 6.6BRM4
S14 a 7.3BRM
C:
USER:Lens other than A, B or C
For performing shading compensation for
the USER lens.

MAIN menu 2 of 2 (main menu)

#N E X T ¢¢¢¢ MAIN 2/2 ¢¢¢¢
M A R K E R / Z E B R A . .
V F D I S P L A Y 1 / 2 . .
V F D I S P L A Y 2 / 2 . .
! L E D . .
G E N L O C K . .
C A M E R A I D . .
T I M E / D A T E . .
D I A G N O S T I C . .
MARKER/ZEBRA
Setting
Item
options
SAFETY ZONE OFF
01
:
06
:
09
CENTRE MARK ON
OFF
ZEBRA1 DETECT 070%
:
104%
ZEBRA2 DETECT 071%
:
085%
:
105%
ZEBRA2 ON
OFF
SPOT
VF DTL 1
2
3
OFF
" " indicates the factory setting.
35 (E)
Remarks
For selecting the shape of the safety
markers.
OFF:No markers are displayed.
01: 80% and 90% corner display
02: 80% corner display
03: 90% corner display
04: 80% and 90% box display
05: 80% box display
06: 90% box display
07: 16:9 picture frame and 90% of 16:9 display
08: 16:9 picture frame and 80% of 16:9 display
09: 16:9 picture frame (100%) display
For setting the centre marker display to ON
or OFF.
ON: Displayed OFF: Not displayed
For setting the boundary at which the zebra
1 pattern appears.
When the next menu item, ZEBRA2, is set
to SPOT or OFF:
>This item sets the boundary at which the
zebra 1 pattern appears.
When the next menu item, ZEBRA2, is set
to ON:
>This item sets the boundary level at
which the pattern is switched to zebra 1.
<Note>
The ZEBRA2 DETECT level must be set
higher than the ZEBRA1 DETECT level.
For selecting the zebra 2 pattern type.
ON: Zebra patterns 1 and
displayed.
OFF: Only zebra pattern 1 is displayed.
SPOT: Zebra pattern 1 is displayed from
the level set for ZEBRA1 DETECT
to the level set for ZEBRA2
DETECT.
For selecting VF DTL.
The higher the number, the more the detail
of the signals for the viewfinder is
emphasized. When OFF is set, the detail
signals are not output.
2 are