Table of Contents
Advertisement
40
5.17 The Performance Editor
In Performance mode, the Performance Ed allows you to edit parameters which have been assigned to
the knobs. When you use the Performance Editor to modify a sound, the modified values will be
transmitted as exclusive parameter changes (refer to Parameter Guide, MIDI Implementation). (This
will occur only
if
the page GLB-15 parameter Transmit is ON.)
When these messages are received, the same performance edit will take place on the other Prophecy
that received the data. After editing, you can Write the data to save in internal memory or RAM card.
These messages are transmitted and received on the MIDI Global channel.
Changes in the sound th<It are made using the Performance Editor knobs are transmitted using the
MIDI messages specified 1n Edit mode Global section page GLB-5.
PEl-4 on/ off settings can be transmitted and received using MIDI NRPN messages. Use the following
MIDI messages.
PEl
ON
[Bn 63 00 Bn 62 06 Bn 06 7F]
OFF [Bn 63 00 Bn 62 06 Bn 06 00]
PE2
ON
[Bn 63 00 Bn 62 07 Bn 06 7F]
OFF [Bn 63 00 Bn 62 07 Bn 06 00]
PE3
ON
[Bn 63 00 Bn 62 08 Bn 06 7F]
OFF [Bn 63 00 Bn 62 08 Bn 06 00]
PE4
ON
[Bn 63 00 Bn 62 09 Bn 06 7F]
OFF [Bn 63 00 Bn 62 09 Bn 06 00]
5.18 Synchronizing the arpeggiator
In Performance mode, you can synchronize the playback of the arpeggiator with an external device.
Whether the Prophecy is the master (the controlling device) or the slave (the controlled device) is
determined by the setting of Edit mode Global section page GLB-8 [MIDI] Clock Source.
• If the Clock Source is set to INTERNAL, the Prophecy will be the master, and the speed of the
arpeggiator will be controlled by the dial on the front panel.
The arpeggiator playback will also be transmitted via MIDI, causing an external MIDI tone generator
to play the same notes, or controlling the tempo of an external MIDI sequencer.
• If
the Clock Source is set to EXTERNAL, the Prophecy will be the slave, and the arpeggiator speed
will be determined by incoming MIDI Clock messages.
Arpeggiator operations can be transmitted and received using MIDI messages.
Bank Select (transmitted and received) [Bn 63 00 Bn 62 01 Bn 06 nn] nn:00-09 (internal), OA-13 (card)
(The following four messages are received only.)
Arpeggiator on/off
[Bn 63 00 Bn 62 02 Bn 06 nn] nn:00-3F (off), 40-7F (on)
Arpeggiator octave
[Bn 63 00 Bn 62 03 Bn 06 nn] nn:00-03 (octave 1-4)
Arpeggiator latch
[Bn 63 00 Bn 62 04 Bn 06 nn] nn:00-3F (off), 40-7F (on)
Arpeggiator key sync [Bn 63 00 Bn 62 05 Bn 06 nn] nn:00-3F (off), 40-7F (on)
5.19
Arpeggiator
velocity and gate
The velocity and gate values of the arpeggiator can be controlled from a sequencer etc. using the MIDI
messages specified by Edit mode Global section page GLB-6.
Advertisement
Table of Contents
