Preface; Checking The Supplied Items - JRC JMA-1030 Series Instruction Manual

PREFACE / CHECKING THE SUPPLIED ITEMS

PREFACE

Thank you very much for purchasing the JRC marine radar equipment, JMA-1030 series.
This equipment is a marine radar equipment designed to obtain safe operation of marine
ships. This equipment consists of a scanner unit and a display unit as its main units.
Before operating the equipment, be sure to read this instruction manual carefully for
correct operation.
Maintain this instruction manual so that operators can refer to it at anytime.
Refer to this manual when any inconvenience or defect occurs.
In this equipment manual, contains an easy operational bridge card on the appendix page.
Please copy it and equip around the display unit.
About equipment type names:
JMA-1030 is a radar series model name.
Individual name is changed according with the combination of units.
JMA-1030 Series
JMA-1032
JMA-1034

CHECKING THE SUPPLIED ITEMS

STANDARD SUPPLY ITEMS
Standard supply items are as follows.
The normal installation cable length is 10m between scanner and display.
Optional special length cables are prepared by JRC if request.
Option cable is provided with a length of 5m, 15m, 20m, or 30m. (Please order it if necessary)
SCANNER UNIT
INSTALLATION CABLE (SCANNER TO DISPLAY)
POWER CABLE (DC input cable 2m) 1 Piece
STANDARD SPARE PARTS
INSTRUCTION MANUAL
TEMPLATE SHEET FOR SCANNER MOUNTING SCREW HOLES
NOTE:
This radar display is possible to use AIS, TT, LL_ position, Depth, and N-UP functions.
But those all functions need the signal input from GPS, AIS, GYRO, LOG, ECHO SOUNDERS.
ALL external signals are connected using NMEA cable. This cable is sold separately as an
optional accessory, it is not included in the standard supply items.
OPTION UNITS (Not included in standard supplied items)
Please order to JRC agent or factory if necessary.
☆ SCANNER to DISPLAY Cable: 5m, 15m, 20m, 30m
☆ NMEA Signal connection cable: length 1m
☆ RGB external monitor connection unit (NQA-2447) (Not include a RGB monitor)
☆ Rectify unit (NBD-865): AC100/220V to DC24V
x
Display Unit NCD-2256 + Scanner Unit NKE-1066
Display Unit NCD-2256 + Scanner Unit NKE-2044
1 set / DISPLAY UNIT
1 Piece (7ZXRD0032: SPARE FUSE: 58V/7.5A 2pices)
1 Piece (This book)
1 set / SUN COVER
1 Piece (Standard 10m)
1 Piece
1 Piece