Renault DUSTER Driver's Handbook Manual page 157

REAR BENCH SEAT
5
5
A
To reposition the seat A in place
Fasten all of the rear seat belts before
refitting the seat base (refer to the in-
formation on the "Rear seat belts" in
Section 1).
Push down the seat base until it comes
into contact with the seatback(s).
Ensure that the belt stalks 6 are cor-
rectly positioned when refitting the seat
base: to do so, pull the ends of the seat
belts 5 so that all the belt stalks 6 are on
top of the folded-down seat base.
(3/3)
6
5
Unbuckle all of the rear seat belts and
position them correctly (refer to the in-
formation on the "Rear seat belts" in
Section 1).
Check that the four Isofix mounting
rings are on top of the seat base after it
is folded down; refer to the information
on "Child safety: Mounting a child seat"
in section 1.
6
Check that the rear seat
belts are positioned and
operating correctly each
time the rear bench seat is
moved.
When moving the rear
bench seat, ensure that
nothing obstructs the an-
chorage points (part of the
body, a pet, gravel, cloth, toys, etc.).
3.23