Dial Lock - Panasonic KX-TG5240AL Operating Instructions Manual

TG5240AL.fm Page 62 Friday, June 11, 2004 5:22 PM
Special Features

Dial Lock

Handset Base Unit
The dial lock feature allows you to prevent others from making calls with the
handset(s) and base unit. You can turn on the dial lock for all the units using a
handset. To use this feature, turn the feature on. The factory preset is OFF.
When the dial lock is turned on, only numbers stored in the phone book as
emergency numbers (numbers stored with a # at the beginning of the name) can
be dialled (p. 41). We recommend storing emergency numbers in the phone
book before using this feature.
To turn the dial lock on
1
Press [MENU].
2
Scroll to "Dial lock" by pressing [d] or
[B], then press the soft key (
3
Enter a 4-digit password.
• This password is required when turning the dial
lock off.
• If more than 4 digits are entered, the last 4 digits
are the password.
4
Press the soft key (
5
Press the soft key (
• "Dial lock on" is displayed.
6
Press [OFF].
• If the dial lock is turned on, the handset displays "Dial lock". While there are
missed calls, "Dial lock" is not displayed.
• If you make a call while the dial lock is turned on:
— using the handset, the handset beeps 3 times and "Dial locked" is displayed.
— using the base unit, the base unit beeps 3 times.
• Please write down your password. If you forget your password, consult your
nearest Panasonic service centre.
62
Handset
).
SELECT
).
SAVE
).
YES
Dial lock
Enter password
:_ _ _ _
Enter password
:1234
Turn Dial lock
on?