Setup Wizard - Windows - D-Link DNR-312L User Manual

Network video recorder with hdmi

Hide thumbs Also See for DNR-312L:

Table of Contents

Section 2 - Installation

The following instructions show you how to set up the NVR using your

Windows computer. If you are using a Mac computer, refer to Setup Wizard

- Mac on page 18.

Step 1

Insert the Installation CD-ROM into your computer's optical drive to start

the autorun program. Click Start to begin the wizard.

Note:

If the autorun program does not automatically start on your computer, click the

Start button and type D:\autorun.exe (where D: represents the drive letter of

your CD-ROM drive) and press Enter. When the autorun screen appears, click

Install and follow the on-screen instructions.

You can also visit www.dlink.com/support to download the software for your

product.

Step 2

Click Next to proceed.

Note: The computer used to access the NVR must be on the same subnet as the NVR. If your network is using a DHCP server, the NVR

will automatically be in the same subnet.

D-Link DNR-312L User Manual

Setup Wizard - Windows

Table of Contents