D-Link DNR-312L User Manual page 59

Section 4 - Configuration
You can save the NVR configuration to a file and restore it when necessary,
such as restarting the NVR in the event of a crash. Reset the NVR to restore
all configurations to factory default. Click Save to apply your changes.
If the NVR is malfunctioning or crashes unexpectedly, click Restart
System Restart:
on the NVR. Restarting the NVR will take about ninety seconds.
System This will shut down the NVR.
Shutdown:
Restore to This will reset all settings back to the factory defaults.
Factory Default
Settings:
Save All the configurations can be saved as a file to the specified location.
Click Save to save the file.
Configuration
Settings:
Load You can restore the configuration file after resetting to factory
default file. Click Browse to select the configuration file and restore
Configuration
it by clicking Load.
Settings:
Idle Time When the administrator enters all the Setup pages (except the
(Minutes): Live Video and Playback Page), the NVR will keep track of the idle
time when the user is not active. If this inactive period exceeds the
specified limit, the user will be logged out and will have to log in
again for security purposes. You can change the idle time limit here.
Buzzer:
Enable or disable the buzzer. This is an audible alarm that sounds off
when an event is triggered.
D-Link DNR-312L User Manual
System
55