Daikin Altherma ERHQ006-008AD Technical Data Manual page 26

2 Specifications
2-2 ELECTRICAL SPECIFICATIONS
1
Wiring For power
connections supply backup
heater
2
Connection type
Quantity of wires
Type of wires
Type of wires
Connection type
Quantity of wires
Type of wires
Connection type
Quantity of wires
Type of wires
Type of wires
Connection type
Quantity of wires
Type of wires
Type of wires
Connection type
Quantity of wires
Type of wires
Type of wires
Notes
26
• Indoor units • EKHBH-X008AA
Quantity of wires
Type of wires
(4) For more details of the voltage range and current refer to installation manual EKHBH/X008AA*
In accordance with EN/IEC 61000-3-11(*), it may be necessary to consult the distribution network operator to ensure
(*) European/International Technical Standard setting the limits for voltage changes, voltage fluctuations and flicker
TM
• Altherma • Indoor units
EKHBH008AA
4G
Select diameter and type according to national and local regulations
For power supply connection to Optional Warm Water Tank + Q2L
3G
Select diameter and type according to national and local regulations
For connection with R5T
wire included in option EKHWS*
Wire included in option EKHWS*
For connection with A3P
Depends on thermostat type, refer to installation manual EKHB/X008AA*
Select diameter and type according to national and local regulations
Voltage: 230V/Maximum current: 100mA/Minimum 0,75 mm²
For connection with M2S
3G
Select diameter and type according to national and local regulations
Voltage: 230V/Maximum current: 100mA/Minimum 0,75 mm²
For connection with M3S
3G or 4G
Select diameter and type according to national and local regulations
Voltage: 230V/Maximum current: 100mA/Minimum 0,75 mm²
that the equipment is connected only to a supply with Zsys(**) <= Zmax
in public low-voltage supply systems for equipment with rated current <= 75A
(**) System impedance
EKHBX0008AA