Sending A Document Via Rightfax - Panasonic Panafax UF-7000 Network Connection

Sending a Document via RightFax

When the RightFax server is used to send a fax, the following details are entered in the recipient (TO) field and
sender (FROM) field.
Field
Recipient Station Name registered for One-Touch or ABBR. dialing. If manual number dialing is used, you
can enter the user name from the control panel.
Sender
<When the user authentication is not enabled>
Logo and Email Address of this device.
or
Name and Email Address selected with Sender Selection function.
<When the user authentication is enabled>
Name of the authenticated user registered with Windows Server.
Login, and then set document(s) on the ADF.
Note:
If you need to login, see "Login Procedure" on page 8 for details.
Specify the recipient.
Ex: 5551234
Note:
Quick Name Search dialing, One- Touch/ABBR. dialing, and Directory Search
dialing can be used to specify the recipient. For details, refer to the Operating
Instructions for Facsimile and Copy Functions.
Press to scan the document, and start sending.
START
If you press
SET
dialing, you can enter the recipient's name. (Up to 15 characters)
Enter the name, and press
When you press
START
sending.
10
instead of when using manual number
START
.
SET
, the machine scans the document and starts
Content
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234
*STORE* NO. 001
PAGES=001 01%
ENTER NAME:
1 STN(S) ARE SET
ADD MORE OR START
*STORE* NO. 001
PAGES=001 01%