Shortcut Key Functions; Electronic Program Guide (Epg) - Teac SDB451 User Manual

Upgrade via second STB
1. Power off the master and slave STB.
2. Connect master STB to slave STB by a crossed 'RS232 serial cable'. (Data
will transfer from master STB to slave STB)
3. Power on the master receivers.
4.
Enter the System update window,
5.
Power on the slave STB, the upgrade will start automatically,
6. Power off the two STBS.
6. Plug off the 'RS232 serial cable'.
7. Reset the STB.
Upgrade via PC
To upgrade your STB via a PC, you will need a serial cable to connect the PC
and your STB. Follow the upgrade instructions that accompany the upgrade file.

5. Shortcut Key Functions

The basic TV and Radio functions of your receiver are described below:

5.1 Electronic Program Guide (EPG)

In normal view mode, press GUIDE key on the RCU to get into EPG Info.
The left side of this window is program list
where you can use keys to select desired
program. The content for the highlighted
channel will be shown on the right. In program
list: If you want to know details about one EPG,
press key at this EPG. Press EXIT to return
to previous menu, or press MENU key to close
this window.
19