Sending Faxes Manually; Selecting The Resolution - Panasonic KX-FT31BX Operating Instructions Manual

Sending faxes manually

1 Open the document feeder tray.
2
Adjust the width of the document guides to the size
of the document.
3
Insert the document FACE DOWN (up to 5 sheets)
until a beep tone is heard.
Display:
4
Press RESOLUTION
desired setting, if necessary (see the bottom of this
page).
5 MONITOR
Press or lift the handset.
6 Dial the fax number.
Example:
7
When a fax tone is heard, press
START/COPY/SET
using it.
Note:
If the other party answers your call, ask them to start
receiving a fax, then press your
To feed 6 or more sheets at a time
Insert the first 5 sheets of the document. Add the extra
sheets (up to 5) before the last sheet is fed into the unit.

Selecting the resolution

Select the desired resolution according to the type of document.
STANDARD
FINE
SUPER FINE
HALF TONE
Using the fine, super fine or half tone setting will increase the transmission time.
If the resolution setting is changed during feeding, it will be effective from the next sheet.
The super fine resolution only works with other compatible machines.
STANDARD
repeatedly to select the
TEL=
TEL=5678901
, and hang up the handset if
CONNECTING
START/COPY/SET
For printed or typewritten originals with normal-sized characters.
For originals with small printing.
For originals with minute printing.
For originals containing photographs, shaded drawings, etc.
Document
feeder tray
Dial keypad
REDIAL/PAUSE
MONITOR
To redial the last number
Press
REDIAL/PAUSE
If the line is busy, the unit will automatically
redial the number up to 5 times.
While waiting for redial, the following will be
displayed.
.
To stop transmission
Press .
STOP
To eject the document, press
Sending Faxes
Document guide(s)
FACE DOWN
STOP
RESOLUTION
START/COPY/SET
.
WAITING REDIAL
again.
STOP
31