Saeco HD8763 Operating Instructions Manual page 76

ENGLISH
74
Ready Signals (Green Colour)
Warning Signals (Yellow Colour)
Insert the water dispensing spout and press the "
dispensing.
Press " " to exit.
The machine is warming up to dispense beverages.
The machine is warming up.
The machine is performing the rinse cycle. Wait until the machine has com-
pleted the cycle.
The machine needs the "INTENZA+" water fi lter to be replaced.
The brew group is being reset due to machine reset.
Fill the coff ee bean hopper with coff ee beans and restart the cycle.
The machine is priming the circuit.
You need to descale the machine. Press the "
process. Follow the steps described in the "Descaling" chapter of this manual.
If you want to descale the machine later, press the "
using the machine.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case repair is NOT covered under your warranty.
" button to start
" button to start the descaling
" button to continue