Saeco HD8763 Operating Instructions Manual page 18

ENGLISH
16
8 Press the " " button to start dispensing hot water.
9
This icon is displayed. The machine reminds you to install the water
dispensing spout. Check that the water dispensing spout is correctly
installed. Press " " to confi rm. The machine will start dispensing hot
water.
10
Dispense water until the no water icon appears.
Note:
The manual rinse cycle can be stopped by pressing the "
11
At the end, fi ll the water tank again up to the MAX level. Now the ma-
chine is ready to brew coff ee.
The display to the left will be shown.
Note:
The automatic rinse/self-cleaning cycle is initiated when the machine has
been in stand-by mode, or turned off , for more than 15 minutes.
When you have not used the machine for 2 or more weeks you also have
to perform the manual rinsing cycle At the end of the cycle, it is possible to
brew a coff ee.
" button.