When A Function Does Not Work, Check Here Before Requesting Help - Panasonic KX-FL501 Operating Instructions Manual

When a function does not work, check here
before requesting
General
Problem
I cannot make and receive
calls.
I cannot make calls.
The unit does not work.
The unit does not ring.
The other party complains
they only hear a fax tone and
cannot talk.
The REDIAL/PAUSE
does not function properly.
The receive mode does not
function properly.
During programming, I cannot
enter the code or ID number.
The unit beeps.
help!
The power cord or telephone line cord is not connected.
Check the connections (p. 16).
If you used a splitter to connect the unit, remove the
splitter and connect the unit to the wall jack directly. If the
unit operates properly, check the splitter.
The dialing mode setting is wrong. Change the setting of
feature #13 (p. 54).
Disconnect the unit from the telephone line and connect
the line to a known working telephone. If the working
telephone operates properly, contact our service personnel
to have the unit repaired. If the working telephone does not
operate properly, contact your telephone company.
The ringer volume is set to off. Adjust it (p. 21).
FAX ONLY mode is set. Tell the other party the number is
only used for faxes.
Change to TEL mode (p. 42) or TEL/FAX mode (p. 46).
button
If this button is pressed during dialing, a pause will be
inserted. If pressed immediately after a dial tone is
obtained, the last number dialed will be redialed.
A Distinctive Ring pattern of feature #31 is set (p. 56).
TEL/FAX mode is set (p. 46, 47).
All or part of the numbers are the same. Change the code
or ID number of features #12 (p. 54), #41 and #49 (p. 57).
Recording paper has run out. Press
beeps and install paper.
For fax advantage assistance, call 1-800-435-7329.
Operations
Cause & solution
STOP
to stop the
63