Maintenance And Cleaning - Beko DPU 7380 X User Manual

5

Maintenance and cleaning

Service life of the product extends and frequently faced
problems decrease if cleaned at regular intervals.
B
This product must be unplugged during
maintenance and cleaning works (control
panel, body, etc.).
5.1 Lint Filter / Loading Door Inner
Surface
Lint and fibres released from the laundry to the air
during the drying cycle are collected in the Lint Filter.
C
*Such fibre and lint are generally formed
during wearing and washing.
A
Always clean the lint filter and the inner
surfaces of the loading door after each
drying process.
C
You can clean the lint filter housing with a
vacuum cleaner.
To clean the lint filter:
1. Open the loading door.
2. Remove the lint filter by pulling it up and open the
lint filter.
3. Clean lint, fibre, and cotton raveling by hand or
with a soft piece of cloth.
4. Close the lint filter and place it back into its
housing.
C
A layer can build up on the lint filter pores
that can cause clogging of the lint filter
after using the machine for a while. Wash
the lint filter with warm water to remove
the layer that builds up on the lint filter
surface. Dry the lint filter completely
before reinstalling it.
Dryer / User Manual
C
Clean the entire inner surface of the
loading door and loading door gasket.
57 / EN