Related Manuals for Beko D1 5062 B
Summary of Contents for Beko D1 5062 B
-
Page 1: Washing Machine
Washing Machine D1 5061 B D1 5062 B D1 5081 B D1 5081 BS D1 5082 B D1 5101 B D1 5102 B D1 5102 BS... - Page 2 Dear Customer, We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference.
-
Page 3: Table Of Contents
1 Your Washing Machine Overview Specifications 2 Warnings General Safety First Use Intended use Safety instructions If there are children in your house... 3 Installation Removing packaging reinforcement Opening the transportation locks Appropriate installation location Adjusting the feet Connecting to the water supply. Connecting to the drain Electrical connection Destroying the packaging material... -
Page 4: Your Washing Machine
Overview Figure 1 Top Lid Detergent Drawer Control Panel Height-adjustable Feet Loading Door Filter Cap... -
Page 5: Specifications
Specifications Models Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net Weight (kg) Electricity (V/Hz.) Total Current (A) Total Power (W) Spinning cycle (rpm max.) Specifications of this appliance may change without notice to improve the quality of the product. -
Page 6: Warnings
Warnings Please read the following information. Otherwise, there may be the risk of personal injury or material damage. Moreover, any warranty and reliability commitment will become void. General Safety • Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. -
Page 7: Safety Instructions
companies that produce detergents for your machine. Safety instructions • This appliance must be connected to an earthed outlet protected by a fuse of suitable capacity. • The supply and draining hoses must always be securely fastened and remain in an undamaged state. •... -
Page 8: Installation
Installation Removing packaging reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Opening the transportation locks C Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged! 1. -
Page 9: Connecting To The Water Supply
3. Important: Tighten all lock nuts up again. Connecting to the water supply. Important: • The water supply pressure required to run the machine must be 1-10 bar (0,1 – 10 MPa). (Practically, it is necessary to have 10 – 80 liters of water flowing from the tap in one minute to have your machine run smoothly.) Attach a pressure-... -
Page 10: Electrical Connection
connections. Your house may be flooded if the hose gets out of its housing during water discharging. • The hose should be attached to a height of at least 40 cm, and 100 cm at most. • In case the hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water... -
Page 11: Initial Preparations For Washing
Initial preparations for washing Sorting the laundry • Sort the laundry according to type of fabric, color, and degree of soiling and permissible water temperature. Always follow the advice on the garment labels. Non machine- Washing water Wash with washable temperature sensitive, short programs. -
Page 12: Loading Door
Following weights are given as examples. Laundry type Bathrobe Napkin Duvet cover Bed Sheet Pillowcase Tablecloth Towel Evening gown Underclothing Men’s coveralls Men’s shirt Men’s pajamas Blouse Loading door The door is locked during program operation. The door can be opened after some time following the program end. - Page 13 Detergent quantity for prewashing 1/2 measure for main 1 measure washing an additional with hard water 1/2 measure Softener Put the softener into the softener compartment of the detergent dispenser. • Use the proportions recommended on the packet. • Never exceed the (> max <) level marking;...
-
Page 14: Selecting A Program And Operating Your Machine
Selecting a Program and Operating Your Machine Control panel Figure 2 7 - On/Off Button 8 - Door Indicator 9 - Program Follow-up Indicator 10 - Child-proof Lock Indicator 11 - Spin Speed Adjustment Knob 12 - Program Selection Knob 13 - Time Delay Key 14 - Auxiliary Function Keys 15 - Start/Pause/Cancel Button... -
Page 15: Turning The Machine On
Turning the machine on You can prepare the machine for program selection by pressing the the “On/Off” button. When the “On/ Off” button is pressed, the “Lid” light illuminates indicating that the door is unlocked. Press the “On/Off” button again to shut down the machine. C Pressing the “On/Off”... -
Page 16: Spin Speed Selection
clothes that bear “not machine- washable” labels for which hand wash is recommended on this program. It washes the laundry with very tender washing movements without damaging your clothes. Additional programs For special cases, there are also extra programs available: C Additional programs may differ according to the features of your machine. -
Page 17: Program Selection And Consumption Table
Program selection and consumption table Programme Cottons Cottons 60** Cottons Super Synthetics 2.5 120 55 0.90 Synthetics 2.5 125 55 0.55 Delicate Woollens 1.5 75 Hand wash Mini 2.5 30 • : Selectable * : Automatically selected, not cancellable. **: Energy Label programme (EN 60456) Water and power consumption and programme duration may differ from the table shown, subject to changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions,... -
Page 18: Auxiliary Functions
Auxiliary functions Auxiliary function selection keys • Desired auxiliary function depending on the program is selected. • Some combinations cannot be selected together. • Warning signal on the selected auxiliary function will light up. Auxiliary function buttons may differ according to the model of your machine. Auxiliary function selection If an auxiliary function that should not be selected together with a previously... -
Page 19: Changing The Program After The Program Has Started
The “Wash” light on the program follow-up indicator illuminates when “Start/Pause/Cancel” button is pressed after selecting the washing program. The “Program finished” lamp illuminates and the “Wash” light will fade when the program comes to an end. The “Lid” light flashes. Meanwhile, the door will stay locked for your safety and when it is safe to open, the “Lid”... -
Page 20: Child-Proof Lock
steadily after 1-2 minutes if the water level in the machine is suitable. Laundry may be added or taken out by opening the door. If the “Lid” lamp does not light up continuously at the end of this time, the water level in the machine is not suitable and laundry cannot be added. -
Page 21: Quick Instructions For Daily Use
Quick instructions for daily use Preparation 1. Turn the tap on completely. Check if the hoses are connected tightly. 2. Place the laundry in the machine. 3. Add detergent and softener. Starting 1. Press the “On/Off” button. 2. Select the programme and the temperature. - Page 22 3. Set the spin speed if spin speed adjustment is available on your machine. 4. Press “Start/Pause/Cancel” button. After the program is finished 1. “Program finished” lamp will light up on the program follow-up indicator. The lid can be opened after 2 minutes when the “Program Finished”...
-
Page 23: Cleaning And Care
Cleaning and care Detergent drawer Remove any powder residue buildup in the drawer. To do this; 1. Press the dotted point on the siphon in the softener compartment and pull towards you until the compartment is removed from the machine. C If more than a normal amount of water and softener mixture starts to gather in the softener compartment,... -
Page 24: Draining Any Remaining Water And Cleaning The Pump Filter
Draining any remaining water and cleaning the pump filter Filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump propeller during discharging of the washing water. Thus, a good water discharger is achieved and the pump life is extended. - Page 25 hose and fit the hose back into its place. If your product is not supplied with an emergency drain hose, do the following as shown in the figure below: • Place a large container in front of the filter to receive water flowing from the filter.
-
Page 26: Troubleshooting
Troubleshooting Problem Cause Machine may have Program switched to self cannot be protection mode due to started or an infrastructure problem selected. (such as line voltage, water pressure, etc.). There may be some water in your machine when you Water in the receive it. - Page 27 The water being taken Improper position of the in is directly drain hose. discharged. No water can This is not a problem. The be seen in water level is not visible the machine from the outside of the during machine. washing.
- Page 28 In the case of a paused countdown while taking in water: Timer will not countdown until the machine is filled with the correct amount of water. In the case of a paused countdown at the heating step: It continuously Time will not count washes.
- Page 29 - Using insufficient amount of detergent for a long time, - Washing at low Washing temperatures for a long performance is time, poor: - Using insufficient Laundry turns amount of detergent for gray hard waters (soil can stick to the laundry), - Using excessive amount of detergent (detergent can stick to the laundry).
- Page 30 The amount, brand and storage conditions of the detergent used might not be appropriate. Detergent might have been put in the wrong compartment. Machine filter may be It does not clogged. rinse well. Drain hose may be folded. Check the drain hose. Intermediate spins may be skipped.
- Page 31 Water may be siphoned (pulling off. the softener into the washer early) during the fill or rinse cycles. There might be problems with the valves. For your safety, the front door can only be opened 2 minutes after the program is completed.