■
[Resume play]
Set resume play off/on.
■
[Scenario file check]
Execute the contents check of the USB memory
which is connected to the USB terminal. If any error
is detected, the error code and file name will be
displayed.
For details of the error codes, refer to "USB memory
contents check". (see page 82)
Select [Scenario file check] with
<ENTER>.
Scenario file check
Available
■
[Slide show duration]
Select the displaying duration for still images.
[10 sec] ‒ [600 sec]
Function button settings
Assigns specific functions to the numeric buttons (<1>
to <6>). The buttons can be used as shortcut keys by
assigning frequently used operations.
1
Switch [Function group] with
[Function button settings] - submenu screen
Function button settings
Function group
Function button 1
Function button 2
Function button 3
Function button 4
Function button 5
Function button 6
Function button guide
2
Select the numeric button with
and set the function to assign with
.
■
Functions assignable to the numeric
buttons
[Input] (Direct input select)
Input can be selected with single-touch operation.
[HDMI1] / [HDMI2] / [DVI-D] / [PC] / [VIDEO] /
[USB]
and press
.
Input
Input
HDMI1
↓
HDMI2
Memory load
DVI-D
↓
PC
VIDEO
Shortcut
USB
On
[Memory load]
Memory can be loaded with single-touch operation.
Memory load (see page 41)
[MEMORY1] to [MEMORY6]
●
[MEMORY1] to [MEMORY6] load functions are
already assigned to <1> to <6> respectively.
These settings cannot be changed.
[Shortcut]
[Signal], [Screensaver], [Set up timer], [Power
management settings], [Network settings]
●
Pressing the numeric button displays the menu
screen. Pressing the button again exits the
menu screen.
[AV mute]
●
Pressing the numeric button mutes the audio
and pictures.
To cancel, press any button on the remote
control except the <Standby (ON/OFF) button>.
Shipping condition
The following functions are assigned to the numeric
buttons as factory default.
[Input]
1 HDMI1
2 HDMI2
3 DVI-D
4 PC
5 VIDEO
6 USB
■
[Function button guide]
Sets the function display when numeric buttons are
pressed. Set this for each function group.
[On]:
Displays the function list for the numeric buttons.
[Off]:
Does not display the function list. Operation starts
when numeric buttons are pressed.
Note
●
When <FUNCTION> is pressed, [Function button
guide] will be displayed regardless of the [On] / [Off]
settings.
[Memory
[Shortcut]
load]
MEMORY1
[Signal]
MEMORY2
[Screensaver]
MEMORY3
[Set up timer]
[Power
MEMORY4
management
settings]
[Network
MEMORY5
settings]
MEMORY6
AV mute
English
55