Fujitsu PRIMERGY TX1330 M2 Operating Manual page 17

Accessible drives
The server has three 5.25-inch bays that can be used in various ways:
The individual bays can be equipped with any 3.5-inch drives (height:1.6 inch).
You can install a multibay (DVD-LSD/LSP) in the top bay. You can install a
slimline DVD drive and the ServerView Local Service Display or ServerView
Local Service Panel in the multibay (DVD-LSD/LSP).
As an option for the top bay, a slimline DVD / backup drive cage is available.
I
Please note the following:
– A DVD drive must have been installed in order to operate the server.
– The accessible drives cannot be replaced during operation.
– You are required to open the drive cover of system when you access
to the 5.25-inch drives.
Power supply
In its basic configuration the server has a standard power supply unit or a hot-
plug power supply unit that adjusts automatically to any mains voltage in the
range 100 V - 240 V. Besides the hot-plug power supply unit, a second hot-plug
power supply unit can be installed optionally to serve as a redundant power
supply. If one power supply unit fails, the second power supply unit in the
redundant configuration ensures operation can continue uninterrupted.
Fujitsu battery unit
FJBU behaves as a modular UPS in the server. When power fail happened, the
server can operate by FJBU battery for a while.
FJBU supports hot plugging, and can be replaced during operation.
You can download the management software (FJBU management software) for
the following OS:
– Windows Server 2012 R2, Windows Server 2012,
Windows Server 2008 R2 SP1, Windows Server 2008 R2 SP2
–
I
FJBU (Fujitsu battery unit) management software is not available in Red
Hat Enterprise Linux environment. Please use the IPMI function at Linux
environment.
TX1330 M2
Operating Manual
Functional overview
17