Solving Problems With Media Misfeeds - Konica Minolta 4650EN User Manual

Solving Problems with Media Misfeeds

Solving Problems with Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
Frequent misfeeds in any area indicate that area should be checked,
repaired, or cleaned. Repeated misfeeds may also happen if you're
using unsupported print media.
Symptom Cause
Several The front edges of
sheets go the media are not
through the even.
printer
The media is moist
together.
from humidity.
Too much static elec-
tricity is present.
Media mis- Right side cover
feed mes- needs to be opened
sage stays and closed again to
on. reset the printer.
Some media remains
misfed in the printer.
Duplex mis- Unsupported media
feeds. (wrong size, thick-
ness, type, etc.) is
being used.
Media is still being
misfed.
Solution
Remove the media and even up the
front edges, then reload it.
Remove the moist media and replace it
with new, dry media.
Do not fan transparencies.
Open and close the right side cover of
the printer again.
Recheck the media path and make
sure that you have removed all of the
misfed media.
Use KONICA MINOLTA-approved
media. See "Media Specifications" on
page 100.
Only plain paper, 60–90 g/m
lb) can be autoduplexed. See "Media
Specifications" on page 100..
Make sure that you have not mixed
media types in Tray 1.
Do not duplex (double-sided) enve-
lopes, labels, thick stock, glossy, or
transparencies.
Recheck the media path inside the
duplex option and make sure that you
have removed all of the misfed media.
2
(16–24
191