Your magicolor 4650EN/4650DN is specially designed for optimal performance in Windows, Macintosh and Linux environments. Trademarks KONICA MINOLTA and the KONICA MINOLTA logo are trademarks or registered trademarks of KONICA MINOLTA HOLDINGS, INC. magicolor and PageScope are trademarks or registered trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business Technolo- gies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form (“Font Programs”), other software which runs on a computer system for use in conjunction with the...
11. Notice to Government End Users: The Software is a “commercial item,” as that term is defined at 48 C.F.R.2.101, consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212. Consis- tent with 48 C.F.R.
Page 5
4. DISCLAIMER OF WARRANTY Adobe licenses the Software to you on an “AS IS” basis. Adobe makes no representation as to the adequacy of the Software for any particular pur- pose or to produce any particular result. Adobe shall not be liable for loss or damage aris- ing out of this Agreement or from the distribution or use of the Software or any other materials.
Page 6
“TOYO INK Standard Color on Coated paper” is compatible with “JAPAN COLOR”. Agreement 1. The reproduction of images on a printer or a monitor using this ICC Profile do not com- pletely match the TOYO INK Standard Color on Coated paper.
Contents 1 Introduction ... 1 Getting Acquainted with Your Printer 2 Space Requirements Printer Parts Front View 4 Rear View 5 Front View with Options 5 2 About the Software ... 7 Printer Driver CD-ROM 8 PostScript Drivers PCL Drivers...
Page 10
Windows Vista/XP/Server 2003/2000 (KONICA MINOLTA mc4650 PCL6, KONICA MINOLTA mc4650PS) 12 Uninstalling the Printer Driver (for Windows) 14 Windows Vista/XP/Server 2003/2000(KONICA MINOLTA mc4650 PCL6, KONICA MINOLTA mc4650PS) 14 Displaying Printer Driver Settings (for Windows) 15 Windows Vista 15 Windows XP/Server 2003 15...
Page 11
Configuration Menu Overview 30 Main Menu PROOF/PRINT MENU Printing/Deleting a Stored Job Entering the Password PRINT MENU PAPER MENU QUALITY MENU MEMORY DIRECT CAMERA DIRECT INTERFACE MENU SYS DEFAULT MENU MAINTENANCE MENU SERVICE MENU 5 Camera Direct ... 95 Camera Direct 96 Printing Directly from a Digital Camera 6 Memory Direct ...
Page 12
Clearing a Media Misfeed in Tray 2 177 Clearing a Media Misfeed in Tray 3 181 Clearing a Media Misfeed from the Duplex (magicolor 4650DN only) 183 Clearing a Media Misfeed from the Fuser Unit 184 Clearing a Media Misfeed from Tray 1 (Manual Feed Tray) and Transfer...
Page 13
Lower Feeder Unit 231 Kit Contents Installing a Lower Feeder Unit A Appendix ... 235 Safety Specifications 236 Technical Specifications 236 Printer Consumable Life Expectancy Chart Our Concern for Environmental Protection 241 What is an ENERGY STAR product? 241 Contents...
100 mm (3.9") 100 mm (3.9") 913 mm (35.9") 469 mm (18.5") Front View 913 mm (35.9") 469 mm (18.5") Front View with Options Getting Acquainted with Your Printer 100 mm 244 mm (3.9") (9.6") 244 mm 100 mm (9.6") (3.9")
Page 17
The option appears shaded in the above illustrations. Getting Acquainted with Your Printer 962 mm (37.9") 326 mm (12.8") 536 mm (21.1") Side View with Options 100 mm (3.9")
Printer Parts The following drawings illustrate the parts of your printer referred to through- out this guide, so please take some time to become familiar with them. Front View 1—Control panel 2—Output tray 3—Tray 1 (Manual feed tray) 4—Tray 2 5—Fuser unit...
Rear View 1—KONICA MINOLTA Digital Cam- era Direct Print Port 2—Power switch 3—Power connection 4—Parallel port 5—10Base-T/100Base-TX/ 1000Base-T Ethernet Interface port 6—USB port 7—Ventilation grilles 8—Paper stopper Front View with Options 1—Lower feeder unit (Tray 3) Getting Acquainted with Your Printer...
Operating System Windows Vista Windows Vista for 64bit The XPS driver cannot be installed by using the auto-play installation feature of the Printer Driver CD-ROM. Use/Benefit These drivers give you access to all of the printer features, including finish- ing and advanced layout. See also “Displaying Printer Driver Settings (for...
PPD Files Operating System Macintosh OS X Linux For details on the installation of the Windows printer drivers, refer to the Installation Guide on the Utilities and Documentation CD-ROM. Utilities and Documentation CD-ROM Utilities Utility Download Manager (Windows Vista/XP/Server 2003/ 2000, Macintosh OS 10.2.x or later)
Page 24
For details, refer to the PageScope Plug and Print Quick Guide on the Utilities and Documentation CD-ROM. This network utility enables printers and KONICA MINOLTA multifunctional products to be used in an NDPS envi- ronment. For details, refer to the PageScope NDPS Gateway User Manual on the Utilities and Documentation CD-ROM.
I/O interface – 10Base-T/100Base-TX/1000Base-T Ethernet interface port – USB Revision 2.0 compliant port – Parallel (IEEE 1284) port For details of the Macintosh and Linux printer drivers, refer to the Ref- erence Guide on the Utilities and Documentation CD-ROM. System Requirements...
– (Windows XP/Server 2003) From the Start menu, choose Printers and Faxes to display the Printers and Faxes directory. Right-click the KONICA MINOLTA mc4650 PCL6 or KONICA MINOLTA mc4650 PS printer icon and choose Properties. – (Windows 2000) From the Start menu, choose Settings and then Printers to display the Printers directory.
Page 27
If Printer Memory is selected, select 256 MB, 512 MB or 768 MB according to the installed memory. The factory default setting is 256 MB. If Memory Card is selected, select Disable, Enable (1 GB Under), or Enable (1 GB Over), according to the installed Com- pactFlash card.
When the Uninstall dialog box appears, select the name of the driver to be deleted, and then click the Uninstall button. Click Uninstall. Click OK, and restart your computer. The KONICA MINOLTA mc4650 printer driver will be uninstalled from your computer. Uninstalling the Printer Driver (for Windows)
From the Start menu, click Control Panel, then Hardware and Sound, and then click Printers to open the Printers directory. Right-click the KONICA MINOLTA mc4650 PCL6, or KONICA MINOLTA mc4650 PS printer icon, and then click Printing Preferences. Windows XP/Server 2003 From the Start menu, choose Printers and Faxes to display the Printers and Faxes directory.
Select Defaults from the drop-down list to reset the functions in all tabs to their default values. Paper View Click the button to display a sample of the page layout in the figure area. Using the Postscript and PCL Printer Driver...
This button does not appear on the Quality tab. Printer View Click the button to display an image of the printer (with all installed options) in the figure area. Quality View Click this button to display a sample of the settings selected in the Quality tab.
- Paper that has been printed on with an inkjet printer - Paper that has been printed on with a monochrome/color laser printer/copier - Paper that has been printed on with any other printer or fax machine Layout Tab The Layout Tab allows you to...
Select whether or not economy printing is used Set the edge strength to Low, Middle or High Specify the amount of details in graphic patterns (PCL printer driver only) Specify the format of fonts that are to be downloaded Using the Postscript and PCL Printer Driver...
Print using the printer’s fonts Control the tones of an image (Contrast) (PCL printer driver only) Specify the image compression method (PCL printer driver only) Other Tab The Other Tab allows you to Select that Microsoft Excel sheets are not to be divided when printing...
Use one of the following steps to open the Status Monitor: Windows Vista/XP/Server 2003—From the Start menu, choose All Pro- grams, KONICA MINOLTA, and then Status Monitor. Double-click the Status Monitor icon displayed in the taskbar. Windows 2000—From the Start menu, choose Programs, KONICA MINOLTA, and then Status Monitor.
Printer Alerts—Displays text messages that alert you of conditions such as low toner. Recovery Instructions—Provides you with explanations of what you need to do in order to correct problems and recover from error conditions. Consumables Tab Displays the usage status (approximate percentage remaining) of each con- sumables.
The control panel, located on the top of the printer, allows you to direct the printer’s operation. In addition, it displays the current status of the printer, including any condition that needs your attention. MESSAGE WINDOW About the Control Panel...
Control Panel Indicators and Keys About the Control Panel Function Cancels the currently displayed menu or menu choice Allows you to cancel one or all print jobs that are currently being printed or processed: 1. Press the Cancel key. 2. Press the keys to select either RENT JOB ALL JOBS...
Message Window The current status of the printer, the amount of toner remaining, and any error messages can be viewed from the message window. Details The printer status is indicated by the color of the indicator and light- ing/flashing of the message window.
If the operator or service representative must be called, the sym- If a warning occurs, the symbol When a digital camera is connected to the KONICA MINOLTA Digital Camera Direct Print Port with a USB cable, the sym- When a USB memory device is plugged into the KONICA MINOLTA Digital Camera Direct Print Port, the symbol pears on the right side of the message window.
The configuration menu accessible from the control panel is structured as shown below. Main Menu READY PROOF/ PRINT MENU PRINT MENU PAPER MENU QUALITY MENU MEMORY DIRECT CAMERA DIRECT INTERFACE MENU SYS DEFAULT MENU MAINTENANCE MENU SERVICE MENU * This menu item appears only if an optional hard disk kit is installed. ** This menu item appears when an optional hard disk kit or a Com- pactFlash card is installed, and DIRECT...
Page 45
do not appear if public MEMORY DIRECT CAMERA DIRECT user access has not been permitted through authentication settings. For details on the authentication settings, refer to the Reference Guide on the Utilities and Documentation CD-ROM. Configuration Menu Overview...
This menu item appears only if an optional hard disk kit is installed. With this menu item, print jobs that were set to be saved on the hard disk by using Job Retention on the Basic tab of the printer driver can be printed or deleted.
Page 47
PRINT DELETE If the selected print job was set as a secured job from the printer driver, a screen for entering the password appears. For details on typing the password, refer to “Entering the Password” on page , and then press the Menu/Select key.
Entering the Password If the print job selected in the screen for entering the password appears. Follow the procedure described below to type in the four-digit password specified from the printer driver. Press the to increase or the word. Press the...
PRINT MENU With this menu, printer information, such as the configuration page and the demo page, can be printed. PRINT MENU CONFIGURATION DEMO PAGE STATISTICS PAGE FONT LIST MENU MAP DIRECTORY LIST * This menu item appears only if an optional hard disk kit or a Com- pactFlash card is installed.
Page 50
FONT LIST MENU MAP DIRECTORY LIST Settings POST PRINT/CANCEL SCRIPT Prints the PostScript font list. Settings PRINT/CANCEL Prints the PCL font list. Settings PRINT/CANCEL Prints the menu map. Settings PRINT/CANCEL Prints the directory list of the hard disk or a CompactFlash card .
PAPER MENU With this menu, the paper used for printing can be managed. PAPER MENU PAPER SOURCE **** DUPLEX COPIES ***** COLLATE Configuration Menu Overview DEFAULT TRAY TRAY 1 PAPER SIZE CUSTOM SIZE PAPER TYPE PAPER SIZE TRAY 2 CUSTOM SIZE PAPER TYPE TRAY 3 PAPER SIZE...
Page 52
*** This menu item appear only if the optional lower feeder unit is installed. **** This menu item appears only magicolor 4650DN. ***** This menu item appears only if an optional hard disk kit or a CompactFlash card of 1 GB or more is installed.
Page 53
Configuration Menu Overview Specify the paper size when custom-sized CUSTOM paper is loaded into Tray 1. SIZE The setting units can be switched between millimeters and inches with the DEFAULT MENU/PAPER/UNIT OF setting. MEASURE Setting range for MILLIMETERS (default) – North America: –...
Page 54
TRAY 2 Settings PAPER ANY/PLAIN PAPER/ TYPE RECYCLED/THICK 1/ THICK 2/LABEL/ TRANSPARENCY/ ENVELOPE/POSTCARD/ LETTERHEAD/GLOSSY 1/ GLOSSY 2 Select the setting for the type of paper loaded into Tray 1. Settings PAPER ANY/LETTER/EXECUTIVE/ SIZE A4/A5/A6/ B5(JIS)/B6(JIS)/GOVT LETTER/STATEMENT/UK QUARTO/16K/PHOTO 4×6/ KAI 16/KAI 32/CUSTOM Select the setting for the size of paper loaded into Tray 2.
Page 55
Configuration Menu Overview Specify the paper size when custom-sized CUSTOM paper is loaded into Tray 2. SIZE The setting units can be switched between millimeters and inches with the DEFAULT MENU/PAPER/UNIT OF setting. MEASURE Setting range for MILLIMETERS (default) – North America: –...
Page 56
TRAY PHYSICAL TRAY2/ PHYSICAL TRAY3 Select the tray that is used for printing when a print job is received from another manufacturer’s printer driver. The default setting for TRAY 1 PHYSICAL TRAY1 default setting for all other trays is ICAL TRAY2...
Page 57
DUPLEX LONG EDGE of the paper for long-edge binding. SHORT EDGE sides of the paper for short-edge binding. The setting specified in the printer driver will override this menu setting. Settings COPIES Specify the number of copies to be printed.
QUALITY MENU With this menu, settings for the print quality can be specified. QUALITY MENU COLOR MODE BRIGHTNESS HALFTONE EDGE ENHANCEMENT EDGE STRENGTH ECONOMY PRINT PCL SETTING IMAGE PRINTING TEXT PRINTING GRAPHICS PRINTING IMAGE PRINTING TEXT PRINTING GRAPHICS PRINTING CONTRAST IMAGE PRINTING RGB SOURCE RGB INTENT...
Page 60
CALIBRATION COLOR SEPARATION All factory default values are shown in bold. Settings COLOR MODE and white. Settings BRIGHT- NESS The brightness of the printed image can be adjusted. HALFTONE IMAGE PRINTING SIMULATION TONE CALIBRATION AIDC PROCESS CMYK DENSITY COLOR/GRAYSCALE is selected, the pages are printed in full color. COLOR is selected, the pages are printed in black GRAYSCALE...
Page 61
TEXT PRINTING GRAPHICS PRINTING EDGE IMAGE ENHANCE- PRINTING MENT Configuration Menu Overview Settings LINE ART/DETAIL/ SMOOTH Select how halftones in text are reproduced. is selected, halftones are LINE ART reproduced with high precision. is selected, halftones are DETAIL reproduced with detail. is selected, halftones are SMOOTH reproduced with smoothness.
Page 62
TEXT PRINTING GRAPHICS PRINTING Settings EDGE STRENGTH Select the desired amount that edges are emphasized. average amount. Settings Select whether text edges are emphasized. is selected, the edges are empha- sized. is selected, the edges are not emphasized. Settings Select whether graphic edges are emphasized.
Page 63
Settings ECONOMY PRINT Select whether to print graphics with a reduced density by reducing the amount of toner that is used. printing. when printing. CONTRAST SETTING IMAGE PRINTING Configuration Menu Overview ON/OFF is selected, the amount of toner used is reduced when is selected, the amount of toner used is not reduced is selected, the edges are not emphasized, even IMAGE PRINTING...
Page 64
TEXT PRINTING Settings COMPOSITE GRAY BLACK/BLACK AND GRAY/ BLACK ONLY Specify how black and grays are reproduced in RGB image data. COMPOSITE BLACK selected, black is reproduced using the CMYK colors. BLACK AND GRAY selected, black and gray are reproduced using black only. BLACK ONLY black is reproduced using only black.
Page 65
GRAPHICS PRINTING Configuration Menu Overview Settings VIVID/ INTENT PHOTOGRAPHIC Specify the characteristic applied when converting RGB text data to CMYK data. is selected, a vivid VIVID output is produced. PHOTOGRAPHIC selected, a brighter output is produced. Settings COMPOSITE GRAY BLACK/BLACK AND GRAY/ BLACK ONLY Specify how black and grays...
Page 66
Settings VIVID/ INTENT PHOTOGRAPHIC Specify the characteristic applied when converting RGB GRAPHICS data to CMYK data. is selected, a vivid VIVID output is produced. PHOTOGRAPHIC selected, a brighter output is produced. Settings COMPOSITE GRAY BLACK/BLACK AND GRAY/ BLACK ONLY Specify how black and grays are reproduced in RGB GRAPHICS data.
Page 67
IMAGE SETTINGS PRINTING Configuration Menu Overview Settings DEVICE COLOR/ SOURCE sRGB/ AppleRGB/ AdobeRGB1998/ ColorMatchRGB/ BlueAdjustRGB Specify the color space for RGB image data. DEVICE COLOR selected, no color space is specified. If RGB source profiles are downloaded with the Download Manager, they are available from the list of settings.
Page 68
NATION Specify the destination profile. PROF is selected, a AUTO destination profile that the printer automatically adapts is selected based on a combination of the specified color matching, halftones and other profiles. If destination profiles are downloaded with the Download Manager, they are available from the list of settings.
Page 69
TEXT PRINTING Configuration Menu Overview Settings DEVICE COLOR/ SOURCE sRGB/ AppleRGB/ AdobeRGB1998/ ColorMatchRGB/ BlueAdjustRGB Specify the color space for RGB text data. DEVICE COLOR selected, no color space is specified. If RGB source profiles are downloaded with the Download Manager, they are available from the list of settings.
Page 70
NATION Specify the destination profile. PROF is selected, a AUTO destination profile that the printer automatically adapts is selected based on a combination of the specified color matching, halftones and other profiles. If destination profiles are downloaded with the Download Manager, they are available from the list of settings.
Page 71
GRAPHICS PRINTING Configuration Menu Overview Settings DEVICE COLOR/ SOURCE sRGB/ AppleRGB/ AdobeRGB1998/ ColorMatchRGB/ BlueAdjustRGB Specify the color space for RGB image data. DEVICE COLOR selected, no color space is specified. If RGB source profiles are downloaded with the Download Manager, they are available from the list of settings.
Page 72
NATION Specify the destination profile. PROF is selected, a AUTO destination profile that the printer automatically adapts is selected based on a combination of the specified color matching, halftones and other profiles. If destination profiles are downloaded with the Download Manager, they are available from the list of settings.
Page 73
SIMULATION Configuration Menu Overview Settings SIMU- NONE/SWOP/ LATION Euroscale/ PROF CommercialPre ss/TOYO/DIC Specify the simulation profile. is selected, no NONE simulation profile is specified. If simulation profiles are downloaded with the Download Manager, they are available from the list of settings. Settings SIMU- RELATIVE...
Page 74
CALIBRA- TONE TION CALIBRATION AIDC PROCESS Settings CMYK COMPOSITE GRAY BLACK/BLACK AND GRAY/ BLACK ONLY Specify how black and grays are reproduced using the four CMYK colors. COMPOSITE BLACK selected, black is reproduced using the CMYK colors. BLACK AND GRAY selected, black and gray are reproduced using black only.
Page 75
CMYK DENSITY Settings COLOR SEPARA- TION contents of a color page is separated into the color pages for yellow, magenta, cyan and black, and each is printed with black gradations as individual pages. The printing order is yellow, magenta, cyan, then black. normal color separation is performed.
TYPE OF FILES * This menu item appears when a USB memory device is plugged into the KONICA MINOLTA Digital Camera Direct Print Port. All factory default values are shown in bold. Select the file that you wish to output, and then press the Menu/ LIST Select key.
Page 77
SHORT EDGE printed on both sides of the paper for short edge binding. is selected, duplex printing is not performed. For magicolor 4650DN only. Settings 1-9999 Specify the number of copies to be printed (between 9999...
Page 78
COLLATE Settings TYPE Select the type of files to be displayed. FILES Settings ON/OFF Select whether to collate the copies. is selected, collated printing is performed. is selected, collated printing is not performed. This menu item appears only if the optional hard disk kit or a CompactFlash card of 1GB or more is installed.
CAMERA DIRECT This menu item appears when set to ENABLE In addition, this menu item does not appear if public user access has not been permitted through authentication settings. For details on the authentica- tion settings, refer to the Reference Guide on the Utilities and Documentation CD-ROM.
Page 80
All factory default values are shown in bold. Settings PAPER SOURCE Select the tray that is used for camera direct printing. Settings LAYOUT Specify the number of images printed on a single sheet of media. When set to sheet of media. Settings PAPER MARGIN...
Page 81
SOURCE INTENT RGB GRAY HALFTONE Configuration Menu Overview Settings DEVICE COLOR/sRGB Specify the color space for RGB image data. is selected, no color space is DEVICE COLOR specified. Settings VIVID/PHOTOGRAPHIC Specify the characteristic applied when converting RGB image data to CMYK data. is selected, a vivid output is produced.
INTERFACE MENU With this menu, interface settings can be specified. Restart the printer after changing settings in the INTERFACE MENU JOB TIMEOUT ETHERNET MEMORY DIRECT CAMERA DIRECT TCP/IP ENABLE IP ADDRESS SUBNET MASK DEFAULT GATEWAY DHCP BOOTP ARP/PING HTTP TELNET...
Page 83
*This menu item appears when TCP/IP/ENABLE ** This menu item appears only if an optional hard disk kit or a Com- pactFlash card is installed. Configuration Menu Overview RAW PORT SMTP SNMP WSD PRINT IPSEC IP ADDRESS FILTER IPv6 NETWARE ENABLE APPLETALK ENABLE...
Page 84
ENABLE YES/NO is selected, TCP/IP is enabled. is selected, TCP/IP is disabled. Setting 000.000.000.000 ADDRESS Set the IP address for this printer on the network. Use the specify the value. If the IP address is manually specified, DHCP/BOOTP Setting SUBNET 255.255.000.000...
Page 85
Configuration Menu Overview Settings BOOTP ON/OFF Select whether or not the IP address is automatically acquired. is selected, the IP address is auto- matically acquired. is selected, the IP address is not automatically acquired. Settings ARP/ ON/OFF PING Select whether or not the IP address is automatically acquired.
Page 86
Settings DYNAMIC ENABLE DNS is enabled. DNS is disabled. Settings ENABLE enabled. abled. Settings ENABLE PORT is enabled. disabled. Settings BIDI- REC- TIONAL transmissions are enabled. transmissions are disabled. Settings ENABLE enabled. abled. Settings SMTP ENABLE enabled. abled. Settings SNMP ENABLE enabled.
Page 87
Configuration Menu Overview Settings ENABLE PRINT is enabled. disabled. Settings IPSEC ENABLE enabled. abled. Settings ACCESS ADDRESS PER- FILTER MIS- Select whether to enable or SION disable access granting. ENABLE access granting is enabled. DISABLE access granting is disabled. Settings ACCESS REFUSE Select whether to enable or...
Page 88
NETWARE ENABLE APPLE TALK SPEED/ DUPLEX IEEE 802.1X Settings MEMORY DIRECT Select whether to enable or disable memory direct printing. ENABLE DISABLE Settings AUTO SET- TING configuration of IPv6 is enabled. uration of IPv6 is disabled. Displays the Link-Local LINK address.
Page 89
Settings CAMERA DIRECT Select whether to enable or disable camera direct printing. ENABLE DISABLE Configuration Menu Overview ENABLE/DISABLE is selected, camera direct printing is enabled. is selected, camera direct printing is disabled.
SYS DEFAULT MENU With this menu, settings can be specified to adjust the operation of the printer, such as the display language of the message window and the time until the machine enters Energy Saver mode. SYS DEFAULT MENU LANGUAGE...
Page 91
ENERGY SAVER ENERGY SAVER TIME MENU TIMEOUT CONTRAST SECURITY CLOCK HDD FORMAT CARD FOR- RESTORE DEFAULTS Configuration Menu Overview CHANGE PASSWORD LOCK PANEL DATE (xx.xx.xx) TIME TIME ZONE USER AREA ONLY USER AREA ONLY RESTORE NETWORK RESTORE PRINTER RESTORE ALL...
Page 92
ENABLE WARNING * These menu items appear only if an optional hard disk kit is installed. ** This menu item appears when you select menu. SAVER *** This menu item appears only if an optional CompactFlash card is installed. **** This menu item appears only if the optional lower feeder unit is installed.
Page 93
POLISH Settings AUTO/POSTSCRIPT/PCL Specify the printer emulation language. is selected, the printer automatically selects AUTO the printer emulation language from the data stream. Settings WAIT 0-300 TIME Specify the time until an error is determined to be a PostScript error.
Page 94
Settings CR/LF CR=CR LF=LF/CR=CRLF MAP- LF=LF/CR=CR PING LF=LFCR/CR=CRLF LF=LFCR Select the definitions of the CR/LF codes in the PCL language. Settings LINES 5-60-128 Specify the number of lines per page in the PAGE PCL language. Settings FONT FONT SOURCE NUMBER Specify the default font in the PCL language.
Page 95
PAPER DEFAULT PAPER Configuration Menu Overview Settings DIGTAL ENABLE/DISABLE SIGNA- Select whether to enable or disable XPS TURE digital signatures. is selected, XPS digital ENABLE signatures are enabled. is selected, XPS digital DISABLE signatures are disabled. Settings ON/OFF ERROR Select whether or not an error report is PAGE printed after an XPS error has occurred.
Page 96
Specify the media size when CUSTOM is set to SIZE SIZE The setting units can be switched between millimeters and inches with the DEFAULT MENU/PAPER/UNIT OF setting. MEASURE Setting range for MILLIMETERS (default) – North America: – All other regions: INCHES (default) –...
Page 97
MILLIMETERS AUTO/GRAYSCALE PRINT/COLOR PRINT is selected, printing is automatically performed accord- is selected, black-and-white printing is is selected, color printing is performed, even Settings ON/OFF Select whether or not a startup page is printed when the printer is turned on.
Page 98
Settings AUTO CON- Select whether or not printing continues if the size or type of TINUE media in the selected tray is different from the size or type of media for the print job. AUTO CONTINUE ues after about 10 seconds under the following conditions. At this time, printing will be performed even if the media size is dif- ferent.
Page 99
In order to lock the control panel, be sure to specify a password other than 0000 Specify the date for the printer’s internal clock. The date for Asia and China is set in the order year, month, then day ( YY.MM.DD...
Page 100
EMPTY TONER I-UNIT Initialize the user area of the compactflash card. When this menu item is selected, the printer is automatically restarted. Initialize the compactflash card. When this menu item is selected, the printer is automatically restarted. Reset the network settings to their defaults. When this menu item is selected, the printer is automatically restarted.
MAINTENANCE MENU With this menu, maintenance on this printer can be performed. In order to use this menu, the administrator password must be entered. MAINTENANCE MENU PRINT MENU ALIGNMENT Configuration Menu Overview EVENT LOG HALFTONE 64 CYAN/MAGENTA/ YELLOW/BLACK 64 HALFTONE 128...
Page 102
SUPPLIES QUICK SET- TING DUPLEX PASS MANUAL DUPLEX IMG ADJ CYAN THICK MAGENTA YELLOW BLACK IMG ADJ BLACK REPLACE TRANS. BELT TRANS. ROLLER FUSER UNIT UPDATE SET- TING BACKUP SET- TING Configuration Menu Overview ENVELOPE LABEL GLOSSY 1 GLOSSY 2 PLAIN PAPER PLAIN PAPER THICK 1...
Page 103
* This menu item appears only magicolor 4650DN. **This menu item appears when a USB memory device is plugged into the KONICA MINOLTA Digital Camera Direct Port. All factory default values are shown in bold. PRINT EVENT MENU HALF- TONE...
Page 104
LEFT ADJUST MENT LEFT DUPLEX TRANS- POWER Settings LEFT -15-15 When printing on media in Tray 1, specify TRAY1 the size of the left margin. Settings LEFT -15-15 When printing on media in Tray 2, specify TRAY2 the size of the left margin. Settings LEFT -15-15...
Page 105
Configuration Menu Overview Settings THICK When printing on thick 1 using simplex pass, correct the sec- ondary image transfer current. Settings THICK When printing on thick 2 using simplex pass, correct the sec- ondary image transfer current. Settings POST- CARD When printing on postcard using simplex pass, correct the secondary image transfer...
Page 106
Settings MANUAL PLAIN DUPLEX PAPER When printing on plain paper using manual duplex pass, correct the secondary image transfer current. Settings THICK When printing on THICK 1 using manual duplex pass, correct the secondary image transfer current. Settings THICK When printing on THICK 2 using manual duplex pass, correct the secondary image transfer current.
Page 107
THICK BLACK SUP- PLIES PLACE Configuration Menu Overview Settings GLOSSY When printing on GLOSSY 2 using manual duplex pass, correct the secondary image transfer current. Settings CYAN -5-0-5 When printing on thick paper, adjust the cyan in the image. Settings MAGENTA -5-0-5 When printing on thick paper, adjust the...
SETTING TING BACKUP SET- TING SERVICE MENU With this menu, the service representative can adjust the printer and perform maintenance operations. This menu cannot be used by the user. Setup EXECUTE / CANCEL Select whether or not to update the printer settings from the definitions file on the USB memory device.
If a digital camera with PictBridge (1.0 or later) is connected to the printer through the Camera Direct Print port, images stored on the digital camera can be printed directly from the printer. For details on using the digital camera, refer to your digital cameras manual.
PDF, XPS, JPEG and TIFF files saved on USB memory devices can be printed by plugging the USB memory device into the printer. Memory direct can be used only if the optional hard disk kit or a Com- pactFlash card is installed.
Notes: * Tray 1= Manual feed tray Tray 3 = Lower feeder unit (optional) magicolor 4650DN only *** The minimum possible size for duplex (double-sided) printing is B5(JIS). The maximum possible size for duplex (double-sided) printing is Legal. **** The minimum possible size for duplex (double-sided) printing is B5(JIS).
For custom sizes, use the printer driver to specify the settings within the ranges shown in the table on previous page. Media Types Before purchasing a large quantity of special media, do a trial print with the same media and check the print quality.
Page 116
– Paper that has been printed on with a heat-transfer printer – Paper that has been printed on with any other printer or fax machine Dusty Wet (or damp) Keep media between 35% and 85% relative humidity. Toner does not adhere well to moist or wet paper.
Duplexing Not supported DO NOT use thick stock that is Mixed with any other media in Tray 1 (as this will cause printer misfeed- ing) Envelopes Print on the front (address) side only. Some parts of the envelope consist of three layers of paper—the front, back, and flap.
DO NOT use envelopes that have Sticky flaps Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal- Transparent windows Too rough of a surface Material that will melt, vaporize, offset, discolor, or emit dangerous fumes Been presealed Labels A sheet of labels consists of a face sheet (the printing surface), adhesive, and a carrier sheet:...
Labels may stick to the fuser, causing them to peel off and media misfeeds to occur. Are precut or perforated Shiny backed paper Letterhead Try printing your data on a sheet of plain paper first to check placement. Capacity Tray 1 (Manual Feed Tray) Tray 2/3...
If you touch the face of the transparencies with your bare hands, print quality may be affected. Keep the printer path clean. Transparencies are especially sensitive to a dirty media path. If there are shadows on either the top or the bottom of the sheets, see chapter 9, “Maintaining the Printer”...
100-158 g/m² (26.5-42 lb bond) Duplexing Not supported DO NOT use glossy media stock that is Mixed with any other media in Tray 1 (as this will cause printer misfeed- ing) Media Types Up to 20 glossy media sheets, depending on their thickness.
4.2 mm (0.165") from the edges of the media. Each media size has a specific image- able area, the maximum area on which the printer can print clearly and without distortion. This area is subject to both hardware limits (the physical media size and the...
Do not fan transparencies. Note Although this printer was designed for printing on a wide range of media types, it is not intended to print exclusively on a single media type except plain paper. Continuous printing on media other than plain paper (such as envelopes, labels, thick stock, or transparencies) may adversely affect print quality or reduce engine life.
Page 124
Slide the media guides to pro- vide more space between them. Press down on the center of the paper-lifting plate until the left and right locking tabs (white) lock into place. Load the paper face down in the tray. Loading Media...
Do not load so much paper that the top of the stack is higher than the maximum limit guide. Up to 100 sheets (80 g/m [22 lb]) of plain paper can be loaded into the tray at one time. Slide the media guides against the edges of the paper.
Loading Envelopes Open Tray 1. Slide the media guides to pro- vide more space between them. Press down on the center of the paper-lifting plate until the left and right locking tabs (white) lock into place. Loading Media...
Page 127
Load the envelopes flap side up in the tray. Before loading enve- lopes, press them down to make sure that all air is removed, and make sure that the folds of the flaps are firmly pressed; other- wise the envelopes may become wrinkled or a media misfeed may occur.
Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZE PAPER TYPE the size and type of media that is loaded. See also “PAPER MENU” on page 37. Loading Label Sheets/Postcards/Thick Stock/Glossy Media and Transparencies Open Tray 1. Slide the media guides to pro- vide more space between them.
Page 129
Press down on the center of the paper-lifting plate until the left and right locking tabs (white) lock into place. Load the media face down in the tray. Up to 20 sheets can be loaded into the tray at one time. Slide the media guides against the edges of the media.
Tray 2 Loading Plain Paper Pull out Tray 2. Press down the media pressure plate to lock it into place. Slide the media guides to pro- vide more space between them. Loading Media...
Page 131
Load the paper face up in the tray. Do not load above the M mark. Up to 250 sheets (80 g/m paper can be loaded into the tray at one time. Slide the media guides against the edges of the paper. Loading Media [22 lb]) of plain...
Page 132
Close Tray 2. Select PAPER MENU/PAPER SOURCE/TRAY 2/PAPER SIZE in the configuration menu, and then select the setting for PAPER TYPE the size and type of paper that are loaded. See also “PAPER MENU” on page 37. Loading Media...
Tray 3 (Optional Lower Feeder Unit) Loading Plain Paper Pull out Tray 3. Press down the media pressure plate to lock it into place. Slide the media guides to pro- vide more space between them. Loading Media...
Page 134
Load the paper face up in the tray. Do not load above the M mark. Up to 500 sheets (80 g/m paper can be loaded into the tray at one time. Slide the media guides against the edges of the paper. [22 lb]) of plain Loading Media...
Page 135
Close Tray 3. Select PAPER MENU/PAPER SOURCE/TRAY 3/PAPER TYPE the configuration menu, and then select the setting for the type of paper that is loaded. See also “PAPER MENU” on page 37. Loading Media...
Duplex (double-sided) printing can be done with magicolor 4650DN, which has the duplex unit built in as a standard. If the paper has low opacity (high translucency), then the printed data from one side of the page will show through to the other side. Check your application for margin information. For best results, print a small quantity to make sure the opacity is acceptable.
Page 137
The following Order settings are available when “Booklet” is selected. Load plain paper into the tray. From the printer driver, specify duplex (double-sided) printing (Layout tab in Windows). Click OK. With autoduplexing, the back side is printed first, and then the front side is printed.
All printed media is output to the face-down output tray on top of the printer. This tray has a capacity of approximately 200 sheets (A4/Letter) of 80 g/m (22 lb) paper. If the media is stacked too high in the output tray, your printer may experience media misfeeds, excessive media curl, or static buildup.
How do I store media? Keep media on a flat, level surface in its original wrapper until it is time to load it. Media that has been stored for a long time out of its packaging may dry up too much and cause misfeeding. If media has been removed from its wrapper, place it in its original pack- aging and store in a cool, dark place on a level surface.
Handle the toner cartridges carefully to avoid spilling toner inside the printer or on yourself. Install only new toner cartridges in your printer. If a used toner car- tridge is installed, the indicator message will not clear and the supplies status in the Status Monitor will not be updated.
Page 143
When replacing a toner cartridge, refer to the following table. For optimum print quality and performance, use only approved KONICA MINOLTA toner cartridges for your specific printer type, as listed in the table below. You can find your printer type and the toner cartridge part numbers on the consum- ables reorder label inside the front cover your printer.
Page 144
For optimum print quality and performance, use only the corre- sponded TYPE genuine KONICA MINOLTA toner cartridges. Keep toner cartridges: In their packaging until you’re ready to install them. In a cool, dry location away from sunlight (due to heat).
Follow the steps below to replace the toner cartridge. TONER LOW is set to when the message Open the printer’s front cover. Pull the front lever of the color toner cartridge indicated to the right. The replacement procedure for...
Page 146
Lower the lever to release the lock. Grab the handle of the toner car- tridge to be replaced, and then pull out the cartridge. The following instructions show the procedure to replace the toner cartridge(Y). Note Dispose of the used toner cartridge according to your local regulations. Do not burn the toner cartridge.
Page 147
Shake the cartridge to distribute the toner. Make sure that the toner car- tridge is the same color as the printer compartment, and then insert the toner cartridge into the printer. Make sure that the toner car- tridge is securely installed, and then peel off the protective film.
Page 148
Pull the lever to the left to lock it in place. The front lever should be securely returned to its original position; other- wise, the front cover of the printer cannot be closed. Close the front cover. Replacing Consumables...
Replacing a Imaging Unit When replacing a imaging unit, refer to the following table. For optimum print quality and performance, use only approved KONICA MINOLTA imaging units for your specific printer type, as listed in the table below. You can find your printer type and the imaging unit part numbers on the consumables reorder label inside the front cover your printer.
Page 150
You are advised to replace the indicated imaging unit when the mes- sage I-UNIT LIFE X Check the message window to see which color imaging unit needs replac- ing. Open the printer’s front cover. Pull the front lever of the color toner cartridge indicated to the right. The replacement procedure for...
Page 151
Lower the lever to release the lock. Press down the area marked “Push” on the imaging unit to be replaced, and then slide the unit all the way out of the printer. The following instructions show the procedure to replace the imaging unit (K). Note Dispose of the used imaging unit according to your local regulations.
Page 152
Remove the imaging unit from the bag. Hold the imaging unit with both hands, and then shake it twice as shown in the illustration. Do not grab the bottom of the bag; otherwise, the imaging unit may be damaged, resulting in decreased print quality.
Page 153
Make sure that the new imaging unit to be installed is the same color as the printer compart- ment, and then install the imag- ing unit in the printer. Raise the front lever to its origi- nal position.
Page 154
Pull the lever to the left to lock it in place. The front lever should be securely returned to its original position; other- wise, the front cover of the printer cannot be closed. Close the front cover. Replacing Consumables...
Open the printer’s front cover. Turn the dial on the waste toner bottle counterclockwise until it is in the unlock position. Replacing Consumables appears in the message window. The printer Lock WASTE TONER Unlock...
Page 156
Open the left and right handles of the waste toner bottle. Grab the left and right handles of the waste toner bottle, and then slowly pull out the bottle. Be careful since some waste toner may spill if the lock is closed when the waste toner bottle is removed.
Page 157
Slide the waste toner bottle all the way into the printer. Turn the dial clockwise until the waste toner bottle is in the locked position. Unlock Lock Replacing Consumables...
Close the front cover. If the waste toner bottle is not fully inserted or if the dial is not locked, the front cover cannot be closed. Replacing the Transfer Roller When the time to replace the transfer roller is reached, the message TRANS.
Page 159
Move the lever toward you. Remove the transfer roller. Prepare a new transfer roller. Insert the shaft of the transfer roller into the bearings. Replacing Consumables...
Page 160
Move the levers away from you until it snaps into place. Close the right side cover. Reset the counter in the REPLACE/TRANS. ROLLER Replace the ozone filter, using the following procedure. MAINTENANCE MENU/SUPPLIES/ menu. Replacing Consumables...
Replacing the Ozone Filter Remove the ozone filter from the printer. Slide the new ozone filter into the printer until it snaps into place. Replacing Consumables...
TRANS. BELT/END OF LIFE this message appears; however, since the print quality is reduced, the trans- fer belt unit should be replaced immediately. Turn off the printer and discon- nect the power cord and inter- face cover. Open the printer’s front cover.
Page 163
Using a coin, remove the two screws on the left side. Be careful not to lose the screws. Remove the left side cover. Pull the lever, and then open the right side cover. Before opening the right side cover, fold up Tray 1. Replacing Consumables...
Page 164
Use a coin to loosen the screws securing the transfer belt unit. On the left side, pull to the right the blue shutter lever for the transfer belt unit. Do not remove the blue lever. From the side where the left side cover was removed, hold the arm, and then carefully pull out the transfer belt unit.
Page 165
Prepare a new transfer belt unit. Be careful not to touch the surface of the belt. Do not remove the blue lever. Remove all packing tape from the new transfer belt unit. Remove the protective cover from the new transfer belt unit. Insert the new transfer belt unit along the rails.
Page 166
From the right side cover side, tighten the screws to secure the transfer belt unit and then close the right side cover. Close the right side cover. Attach the left-side cover. Replacing Consumables...
Page 167
Tighten the two screws on the left side. Install the all imaging units and waste toner bottle. For details on installing the imaging unit or waste toner bottle, refer to “Replacing a Imaging Unit” on page 135 or “Replacing the Waste Toner Bottle”...
Reset the counter in the REPLACE/TRANS. BELT Replacing the Backup Battery When the backup battery is at its end of life, the printer’s date and time can- not be retained. Follow the procedure described below to replace the backup battery.
Page 169
Then, slide the rear cover to the right and remove it. Using a screwdriver, loosen the seven screws. (Do not remove them from the printer.) Slide the panel slightly to the right and lift it off the printer. Replacing Consumables...
Page 170
Do not burn the backup battery. Reinstall the panel and tighten the seven screws. Attach the rear cover. Reconnect all interface cables. Reconnect the power cord, and turn on the printer. Replacing Consumables...
UNIT/END OF LIFE sage appears; however, since the print quality is reduced, the fuser unit should be replaced immediately Turn off the printer. Note There are extremely hot parts within the machine. Before replacing the fuser unit, wait about 20 minutes after turning off the machine, and then check that the fusing section has reached room temperature, otherwise, you may get burnt.
Page 172
Use a coin to loosen the two screws securing the fuser unit. Remove the fuser unit. Prepare a new fuser unit. Be careful not to touch the surface of the fuser roller. Replacing Consumables...
Page 173
Insert the fuser unit. Tighten the two screws to secure the fuser unit. Close the right side cover. Reset the counter in the REPLACE/FUSER UNIT Replacing Consumables MAINTENANCE MENU/SUPPLIES/ menu.
Never use sharp or rough implements, such as wire or plastic cleaning pads. Always close the printer’s covers gently. Never subject the printer to vibra- tion. Do not cover the printer immediately after using it. Turn it off and wait until it cools down. Maintaining the Printer...
Page 177
Do not leave the printer’s covers open for any length of time, especially in well-lit places; light may damage the toner cartridges. Do not open the printer during printing. Do not tap media stacks on the printer. Do not lubricate or disassemble the printer.
Cleaning the Printer CAUTION Be sure to turn off the printer and unplug the power cord before cleaning. Exterior Control Panel Ventilation Grill Printer Exterior Cleaning the Printer...
The accumulation of paper dust and other debris on the media rollers can cause media-feeding problems. Cleaning the Media Feed Rollers (Manual Feed Tray) Open Tray 1. Press down on the center of the paper-lifting plate until the left and right locking tabs (white) lock into place. Cleaning the Printer...
Page 180
Clean the media feed rollers by wiping them with a soft, dry cloth. Close the tray. Cleaning the Printer...
Cleaning the Media Feed Rollers (Tray 2/3) Pull out the tray. Clean the media feed rollers by wiping them with a soft, dry cloth. Close the tray. Cleaning the Printer...
Tray 3. Before opening the right side cover of Tray 3 , fold up Tray 1. Clean the media transfer rollers by wiping them with a soft, dry cloth. Close the right side cover of Tray 3. Cleaning the Printer...
Cleaning the Laser Lens This printer is constructed with four laser lenses. Clean all lenses as described below. The laser lens cleaning tool should be attached to the inside of the front cover. Open the printer’s front cover and remove the cleaning tool from the machine’s front cover.
Page 184
Return the laser lens cleaning tool to its holder on the inside of the front cover. Close the front cover. Cleaning the Printer...
Solving other problems Solving problems with printing quality Status, error, and service messages Printing a Configuration Page Print a configuration page to verify the printer is printing correctly, or to check the printer configuration. Press Key (once) Until Display Reads...
Media matches the printer specifications. Media is flat, especially on the leading edge. The printer is on a hard, flat, level surface. You store media in a dry location away from moisture and humidity. You remove transparencies from the output tray immediately after printing to avoid static buildup.
To avoid damage, always remove misfed media gently, without tearing it. Any piece of media left in the printer, whether large or small, can obstruct the media path and cause further misfeeds. Do not reload media that has misfed. Note The image is not fixed on the media before the fusing process.
Media Misfeed Messages and Clearing Procedures Media Misfeed Message PAPER JAM TRAY 2 PAPER JAM TRAY 3 PAPER JAM DUPLEX 1 PAPER JAM DUPLEX 2 PAPER JAM FUSER/EXIT PAPER JAM TRAY 1 PAPER JAM SECOND TRANS PAPER JAM VERTICAL TRANS If the message for media misfeeds in the transfer roller section of the right side covers for Tray 3.
Clearing a Media Misfeed in Tray 2 Pull the lever, and then open the right side cover. Before opening the right side cover, fold up Tray Carefully pull out the misfed media. Clearing Media Misfeeds...
Page 192
CAUTION The area around the fuser unit is extremely hot. Touching anything other than the indicated levers may result in burns. If you get burned, immediately cool the skin under cold water, and then seek professional medical attention. Note Decreased print quality may result if the surface of the image transfer belt or the transfer roller is touched.
Page 193
Close the right side cover. Pull out Tray 2, and then remove all media from the tray. Fan the media you removed and then align it well. Clearing Media Misfeeds...
Page 194
Load the media face up in Tray 2. Make sure that the media is flat. Do not load paper above the M mark. Close Tray 2. Clearing Media Misfeeds...
Clearing a Media Misfeed in Tray 3 Open the right side cover of Tray 3. Before opening the right side cover of Tray 3 , fold up Tray 1. Carefully pull out the misfed media. Close the right side cover of Tray 3.
Page 196
Pull out Tray 3, and then remove all paper from the tray. Fan the paper you removed and then align it well. Load the paper face up in Tray 3. Make sure that the paper is flat. Do not load paper above the M mark. Slide the media guides against the edges of the paper.
Clearing a Media Misfeed from the Duplex (magicolor 4650DN only) Pull the lever, and then open the right side cover. Before opening the right side cover, fold up Tray Carefully pull out the misfed media. Close the right side cover. Clearing Media Misfeeds...
Clearing a Media Misfeed from the Fuser Unit Pull the lever, and then open the right side cover. Before opening the right side cover, fold up Tray Push up the levers of the fuser unit cover, and then open the cover.
Page 199
If the misfed media cannot be removed by pulling it down, pull it from the top of the fuser unit. If the paper becomes crin- kled and jammed in the fuser unit, open the fuser unit cover, and then remove the paper.
Page 200
Note Decreased print quality may result if the surface of the image transfer belt or the transfer roller is touched. Be careful not to touch the surface of the image transfer belt or transfer roller. Push down the levers. Clearing Media Misfeeds...
Page 201
Close the right side cover. Clearing Media Misfeeds...
Clearing a Media Misfeed from Tray 1 (Manual Feed Tray) and Transfer Roller Pull the lever, and then open the right side cover. Before opening the right side cover, fold up Tray Carefully pull out the misfed media. Clearing Media Misfeeds...
Page 203
CAUTION The area around the fuser unit is extremely hot. Touching anything other than the indicated levers may result in burns. If you get burned, immediately cool the skin under cold water, and then seek professional medical attention. Note Decreased print quality may result if the surface of the image transfer belt or the transfer roller is touched.
Page 204
Close the right side cover. Clearing Media Misfeeds...
Recheck the media path and make sure that you have removed all of the misfed media. Use KONICA MINOLTA-approved media. See “Media Specifications” on page 100. Only plain paper, 60–90 g/m lb) can be autoduplexed. See “Media Specifications”...
Page 206
Symptom Cause Media is The media is not cor- misfeeding. rectly positioned in the tray. The number of sheets in the tray exceeds the maximum allowed. The media guides are not correctly adjusted to the media size. Warped or wrinkled media is loaded in the tray.
Page 207
Solution Remove the transparencies and load them in the tray one sheet at a time. Do not fan transparencies before load- ing them. Use KONICA MINOLTA-approved media. See “Media Specifications” on page 100. Clean the media supply roller. For more details, refer to “Media Roll-...
Solution Turn off the printer, confirm that the power cord is correctly plugged into the outlet, and then turn on the printer. Plug another electrical appliance into the outlet and see whether it operates properly.
Page 209
Check that at least Tray 1 is loaded with media, in place, and secure. Make sure the covers are closed securely. Close all covers gently to avoid jarring the printer. Make sure the waste toner bottle and toner cartridges are installed correctly. Clear the media misfeed.
Page 210
( DEFAULT MENU/ENERGY SAVER menu) Wait. No action needed. Add more memory. Install a correct KONICA MINOLTA toner cartridge approved for your spe- cific printer. INCOR- Check the toner cartridges. The image will not print if one or more cartridges are empty.
Page 211
Check that the trays are loaded with media, in place, and secure. Print the overlay file using a suitable driver. Turn off the printer, confirm that the power cord is correctly plugged into the outlet, and then turn on the printer. Contact Technical Support with the...
Page 212
Make sure that you have not mixed media types in Tray 1. Make sure that your document has more than one page. Make sure that “magicolor 4650DN” is selected in the “Model” box under "Device Options" of the Windows printer driver (Properties/Configure tab).
Page 213
Remove the moist media and replace it with new, dry media. Check them for damage. If necessary, contact Technical Support with the error information. Use KONICA MINOLTA-approved media. See “Media Specifications” on page 100. Replace the backup battery. For details, see “Replacing the Backup Bat- tery”...
If it is damaged, replace it. Adjust the humidity for media storage. Remove the moist media and replace it with new, dry media. Load the correct media in the printer. Use a power source with the proper specifications. Remove the media from the tray and check it for static electricity.
Page 215
When printing envelopes, labels, post- cards, thick stock, glossy, or transpar- encies, specify the appropriate media type in the printer driver. Remove the imaging units and check them for damage. If one is damaged, replace it. Remove the imaging units and check them for damage.
Page 216
Solution Remove the toner cartridges and check them for damage. If one is dam- aged, replace it. Place the printer on a flat, hard, level surface. Adjust the humidity in the media stor- age area. Remove the moist media and replace it with new, dry media.
Page 217
Symptom Cause There are One or more of the toner imaging units may be smudges or defective or installed residual incorrectly. images. There are The media path is toner dirty with toner. smudges on One or more of the the back side imaging units may be of the page defective.
Page 218
Remove the imaging unit with the color causing the abnormal image. Replace it with a new imaging unit. Place the printer on a flat, hard, level surface. Print several sheets and the excess toner should disappear. Remove the imaging units and check them for damage.
Page 219
Symptom Cause The color One or more of the has a poor imaging units may be reproduction defective. or has poor color density. If the problem is not resolved, even after all of the above have been per- formed, contact Technical Support with the error information. For contact information, refer to the Need Assistance Sheet.
Status, error, and service messages are displayed in the control panel mes- sage window. They provide information about your printer and help you locate many problems. When the condition associated with a displayed mes- sage has changed, the message is cleared from the window.
INCORRECT INCORRECT MEMORY CARD Status, Error, and Service Messages means... The printer is being restarted. The printer is warming up. The printer is offline. means... do this... The fuser unit has Replace the fuser unit reached the end of its and reset the counter in life.
Page 222
(AM, EU, AP or GC). See page 135. The X toner cartridge Install a is an unapproved KONICA MINOLTA type. toner cartridge of the appropriate type (AM, EU, AP or GC). See page 129. The CompactFlash Delete resources (fonts, card is nearly full.
Page 223
This message... I-UNIT LOW I-UNIT LIFE TONER OUT TONER LOW TRANS. BELT END OF LIFE TRANS.ROLLER END OF LIFE Status, Error, and Service Messages means... do this... The X imaging unit is Prepare the specified low and should be color imaging unit. replaced within 4,500 pages at 5% cover- age of letter/A4...
Page 224
This message... UNABLE TO COLLATE JOB WASTE TONER NEAR FULL HUBS NOT SUPPORTED DEVICE NOT SUPPORTED means... The hard disk is full. Print one copy of the file Print jobs over 10,000 at a time. pages cannot be col- lated. The waste toner bot- Prepare a new waste tle is nearly full.
If desired, hard disk is not install a hard disk. installed. When printing a Change the printer con- stored job, the printer figuration to that when configuration was the job was stored. changed since the job was stored.
Page 226
PAPER MENU/PAPER SOURCE/TRAY CHAINING ON set.) The media size/type Load the correct media set in the printer size and type. driver is different from the size/type of media loaded (Appears when PAPER MENU/PAPER SOURCE/TRAY CHAINING ON set.)
Page 227
This message... PAPER JAM DUPLEX1 PAPER JAM DUPLEX2 PAPER JAM FUSER/EXIT PAPER JAM SECOND TRANS PAPER JAM TRAY1 PAPER JAM TRAYX PAPER JAM VERTICAL TRANS Status, Error, and Service Messages means... do this... Media has misfed in Press the the duplex. play the help screen.
Page 228
The X (Tray 1, 2 or 3) Load the correct media was specified with the into the specified tray. printer driver for print- ing, but Tray X is empty. This message appears when the PAPER MENU/ PAPER SOURCE/...
Page 229
TONER X Status, Error, and Service Messages means... do this... The media type set in Load the correct media the printer driver is type into the specified different from the type tray. of media loaded. The waste toner Install a new waste toner bottle is full.
These messages indicate a more serious error that can only be corrected by a customer service engineer. If one of these messages appears, turn the printer off, then turn it on again. If the problem persists, contact your local vendor or authorized service provider.
Note Use of accessories not manufactured or supported by KONICA MINOLTA will void your warranty. This chapter provides information about the following accessories. Dual In-Line Memory Module (DIMM) Lower Feeder Unit (Tray 3) Hard Disk Kit CF Adapter CompactFlash Note The hard disk kit and CF adapter cannot be installed to be used at the same time.
Turn off all power switches first. If an antistatic wrist strap is provided in your printer option kit, attach one end of it to your wrist and the other end to the bare metal chassis on the back of your printer. Never attach the wrist strap to any piece of equipment with an electrical current present.
MB). Installing a DIMM Note It’s very important to protect the printer controller board and any associated circuit boards from electrostatic damage. Before performing this procedure, review the antistatic caution on page 219. In addition, always handle circuit boards by the edges only.
Page 235
Using a screwdriver, loosen the seven screws. (Do not remove them from the printer.) Slide the panel slightly to the right and lift it off the printer. Insert the new DIMM straight into the DIMM connector until the latches snap into the locked position.
Page 236
Declare the additional Printer Memory in the Windows printer driver (Properties/Configure tab). Print a configuration page ( ) and PRINT MENU/CONFIGURATION PG verify that the total amount of the RAM installed in your printer is listed. Dual In-Line Memory Module (DIMM)
A hard disk kit and a CF adapter cannot be installed simultaneously. Installing the Hard Disk kit Note It’s very important to protect the printer controller board and any associated circuit boards from electrostatic damage. Before performing this procedure, review the antistatic caution on page 219. In addition, always handle circuit boards by the edges only.
Page 238
Then, slide the rear cover to the right and remove it. Using a screwdriver, loosen the seven screws. (Do not remove them from the printer.) Slide the panel slightly to the right and lift it off the printer. Hard Disk Kit...
Page 239
Plug the cable on the hard disk kit into the connector on the con- troller board. Insert the three mounting pins on the hard disk kit into the holes in the controller board to mount the hard disk kit onto the control- ler board.
Page 240
Reconnect the power cord, and turn on the printer. Declare the Hard Disk in the Windows printer driver (Properties/Configure tab). Hard Disk Kit...
Installing the CF adapter and CompactFlash card Note If the installed CompactFlash card is used with a device other than this printer, such as a computer or digital camera, the card is automatically formatted and all of its data is deleted. Note It is very important to protect the printer controller board and any associated circuit boards from electrostatic damage.
Page 242
Turn off the printer and discon- nect the power cord and inter- face cables. Using a screwdriver, remove the screw. Then, slide the rear cover to the right and remove it. Using a screwdriver, loosen the seven screws. (Do not remove them from the printer.)
Page 243
Slide the panel slightly to the right and lift it off the printer. Plug the cable on the CF adapter into the connector on the controller board. Insert the three mounting pins on the CF adapter into the holes in the controller board to mount the CF adapter onto the control- ler board.
Page 244
Reinstall the panel and tighten the seven screws. Attach the rear cover. Reconnect all interface cables. Reconnect the power cord, and turn on the printer. Declare the Memory card in the Windows printer driver (Properties/Con- figure tab). CompactFlash...
Lower Feeder Unit You can install up to one optional lower feeder unit (Tray 3). The lower feeder unit increases your printer’s media feed capacity by 500 sheets. Kit Contents Lower feeder unit with a tray (500-sheet capacity) Lower Feeder Unit...
Installing a Lower Feeder Unit Note Since consumables are installed in the printer, be sure to keep the printer level when moving it in order to prevent accidental spills. Turn off the printer and discon- nect the power cord and inter- face cables.
Page 247
WARNING! This printer weighs approximately 37kg (81.5lb) when it is fully loaded with consumables. The printer must be lifted by two people. Close the right side cover of the lower feeder unit.
Page 248
Reconnect the power cord, and turn on the printer. Declare Paper Source Unit 3 in the Windows printer driver (Properties/ Configure tab). Lower Feeder Unit...
4 laser diode and 1 polygon mirror Mono-component SMT 600 dpi × 600 dpi × 4 bits Simplex Monochrome/Full color: 14.5 seconds for A4 or Letter (plain paper) Duplex (double-sided) (magicolor 4650DN only) Monochrome/Full color: 25 seconds for A4 or Letter (plain paper) Safety Specifications...
Page 251
24/24 page per minutes for A4 or Letter (plain paper) 25/25 page per minutes for A4 or Letter (plain paper) Duplex (double-sided) (magicolor 4650DN only) Monochrome: 24/24 page per minutes for A4 (plain paper) 25/25 page per minutes for Let-...
Page 252
Printing: 52 dB or less Standby: 39 dB or less Height: 385 mm (15.2") Width: 469 mm (18.5") Depth: 536 mm (21.1") Printer: approximately 31 kg (68.3 lb) (without comsum- ables) approximately 37 kg (81.5 lb) (with comsum- ables) USB 2.0 (High Speed) compliant, 10Base-T/ 100Base-TX/1000Base-T Ethernet, Parallel Host USB (PictBridge1.0, USB Device Printing)
Consumable Life Expectancy Chart User-Replaceable Item Toner cartridge Imaging unit Waste toner bottle Transfer roller Ozone Filter (Bundle with transfer roller) Transfer belt unit Fuser Unit Note: A constant environment is one with a temperature between 15 °C [59 °F] and 25 °C [77 °F] and humidity between 35% and 70%. The values shown for the toner cartridge and waste toner bottle indi- cate the number of pages for simplex printing using A4/Letter-size media with 5% coverage.
Page 254
Service-Replaceable Item Media feed roller Average Life Expectancy 300,000 pages Technical Specifications...
Partner, we have determined that this machine meets the ENERGY STAR Guidelines for energy efficiency. The above declaration of conformity applies only to magicolor 4650DN. What is an ENERGY STAR product? An ENERGY STAR product has a special feature that allows it to automati- cally switch to a “low-power mode”...
Page 256
Our Concern for Environmental Protection...
Page 257
Index Accessories 218 CompactFlash 227 DIMMs 220 Hard disk Kit 223 Lower feeder unit 231 Antistatic protection 219 Camera direct 96 CompactFlash 227 Configuration menu 30 Consumables Backup battery 154 Ozone filter 147 Staple 157 Toner cartridge 128 Transfer belt unit 148 Transfer roller 144 Index Waste toner bottle 141...