Light Bulb Replacement; When You Go On Vacation; When You Move - Hotpoint CSX20 How To Get The Best

Care and Cleaning

Light bulb replacement

In Fresh Food Compartment
1. Unplug refrigerator.
2. To align the control knob
properly, note position of
numbered control for proper
reassembly and pull off knob.
3. Pull bottom of light panel down
about 1/4 inch—just enough to
disengage lip at rear from grooves
in retainers on rear wall.
4. Lift panel to disengage top from
pins on side WWS, and remove panel.
After replacing with same size
bulb, reinstall panel (hang top on
pins; pull bottom down, push it
back and release it to let lip engage
grooves in retainers). Replace
temperature control knob in OFF
position, turn it to previous setting,
and plug refrigerator back in.
In Freezer Compartment
1. Unplug refrigerator.
2. Lift light panel to disengage
bottom from pins on side walls and
top from the channel it mates with.
Remove light panel.
reinstall panel (lower top into
channel, and bottom over pins).
3. Plug in refrigerator.
(continued)
When you goon vacation
For extended vacations or
absences,
shut
refrigerator, turn the numbered
control to OFF, clean interior
with baking soda solution of one
tablespoon of soda to one quart of
refrigerator. Leave doors open.
For shorter vacations, remove
perishable f(~ods and leave controls
room temperature is expected to
drop below 60°F., fi~llow same
instructions as for extended
vacations.
If you have an icemaker, set the
be sure to shut off the water supply
to the refrigerator.

When you move

Disconnect power cord from wall
outlet, remove all food, and clean
and dry the interior.
Secure all loose items, such as
grille, shelves and storage pans, by
taping them securely in place to
prevent damage.
Be sure refrigerator stays in upright
position during actual moving and
in van. Refrigerator must be
secured in van to prevent movement.
Protect outside of refrigerator with
blanket.