Table of Contents
Advertisement
SAFETY INSTRUCTIONS
WARNING
Do not open the equipment
unless totally familiar with
electrical circuits and
service manual.
Only qualified personnel
ELECTRICAL
should work inside the
SHOCK
equipment.
HAZARD
Do not approach the ra-
dome closer than 60 cm
when it is transmitting.
Microwave radiation can
cause severe injury or illness.
Radiation level:
10 W/m at 60 cm
Turn off the power at the
mains switchboard before
beginning the installation.
Post a sign near the switch
to indicate it should not be
turned on while the equip-
ment is being installed.
Fire, electrical shock or
serious injury can result if the
power is left on or is applied
while the eqiuipment is being
installed.
2
CAUTION
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply
can cause fire or equipment damage. The
voltage rating appears on the label at the
rear of the communication unit.
Use the correct fuse.
Use 10 A fuse (defalt setting) for 12 VDC
power supply, or replace the fuse to 5 A
(supplied as spare parts) with 24 VDC.
Use of wrong fuse can result in damage to
the equipment.
Keep the following compass safe
distances.
Antenna Unit IC-116
Communication Unit IC-216
AC/DC Power Supply Unit
PR-240-CE
Attach securely protection
earth to the ship's body.
The protection earth is required
to the power supply to prevent
electrical shock
i
Standard Steering
0.3 m
0.3 m
0.3 m
0.3 m
0.9 m
0.6 m
Advertisement
Table of Contents
