Control And Indicator Panel Qc1002 - Atlas Copco QAS 150-200 Cud Instruction Manual

Control and indicator panel
Qc1002™
General description Qc1002™ control
panel
Qc 1002
145
S4
S2
A1 ....... Qc1002™ display
F10 ......Fuse
The fuse activates when the current from the
battery to the engine control circuit exceeds
its setting. The fuse can be reset by pushing
the button.
S2 ....... Emergency stop button
Push the button to stop the generator in case
of an emergency. When the button is
pressed, it must be unlocked, before the
S20
generator can be restarted. The emergency
F10
stop button can be secured in the locked
A1
position with the key, to avoid unauthorized
use.
S20 ..... ON/OFF/REMOTE switch
To start up the unit (locally or remote).
X25 ..... Terminal strip
X25
- 17 -
Qc1002™ Module
The Qc1002™ module is located inside the control
panel. This control module will carry out all
necessary tasks to control and protect a generator,
regardless of the use of the generator.
This means that the Qc1002™ module can be used for
several applications.