Unit Water Pressure Drop - Trane CGA-SVX01A-EN Installation, Operation And Maintenance Manual

TABLE 3 - Unit Water Flow Rate - 60HZ
60Hz
Model Minimum Flow
030 18.5
040 22.9
050 30.2
075 44.9
100 59.1
125 74.7
150 89.5
175 102.6
200 120.0
50Hz
Model Minimum Flow
050 25.1
075 37.3
100 49.1
125 62.1
150 74.4
175 85.5
200 98.3
© American Standard Inc. 2001
Units: LPM
Rated Flow Maximum Flow
27.7 38.8
34.3 48.0
45.3 63.4
67.3 94.2
88.7 124.2
112.0 150.0
134.3 150.0
154.0 175.0
180.0 240.0
Units: LPM
Rated Flow Maximum Flow
37.7 56.6
56.0 84.0
73.7 110.6
93.3 140.0
111.7 150.0
128.3 160.0
149.0 190.0
18
UNIT WATER PRESSURE
DROP
Measure the water pressure rise across the
standard unit (with built-in pump). The
Externally Available Head (E.A.H) should
approximate those indicated by the E.A.H.
curves, with the corresponding flow rates.
For units (without built-in pump) with field-
installed pump outside the unit, water
pressure drop across the unit should
approximate those indicated by the Internal
Pressure Loss (I.P.L.) curves, with the
corresponding flow rates.
For standard unit with built-in pump, refer to
the E.A.H. curve for the system hydraulic
design. For optional unit without a built-in
pump, refer to the I.P.L. curves. (Refer to
Figure 6 for hydraulic characteristics of all
models.)
CGA-SVX01A-EN