Install The Ir Illuminators - Axis Q8665–LE PTZ Installation Manual

5
Base
6
Washer (4x)
7
Screw (4x)
4. The mechanical installation is complete. To access the camera unit, see section Access
the Product on page 34. See also the product's user manual for information on how to
access the video stream.

Install the IR Illuminators

WARNING
• Emission of infrared light (risk group 2) which can be harmful for eyes. Pay attention to
the provided indications. Avoid prolonged eye exposure or use appropriate shielding
or eye protection.
• Risk of electric shock. Make sure the power supply is disconnected.
CAUTION
During normal operation, the surface of the illuminator can reach high temperatures. Do
not allow direct contact and position the appliance where it is inaccessible to unauthorized
personnel. Before touching, switch off the illuminator and allow to cool for a minimum
period of 10 minutes.
Important
To work properly both illuminators must be installed together.
1. Position the bracket on the bottom of the housing.
2. Install the screws and the washers in the holes and tighten them (torque 4 Nm). Make
sure the bracket is fastened firmly.
AXIS Q8665–LE PTZ Network Camera
29