Important Safety Instructions - Crown MA-5002VZ Operation Manual

Important Safety
Instructions
page 2
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings.
Install in accordance with the manufac-
turer's instructions.
8) Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus that produce heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding-type
plug has two blades and a third ground-
ing prong. The wide blade or the third
prong is provided for your safety. If the
provided plug does not fit into your out-
let, consult an electrician for replacement
of the obsolete outlet.
10) Protect the power cord from being walked
on or pinched, particularly at plugs, con-
venience receptacles, and the point where
they exit from the apparatus.
11) Only use attachments/accessories speci-
fied by the manufacturer.
12) Use only with a cart, stand, bracket, or
table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
15) To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
TO PREVENT ELECTRIC SHOCK DO NOT
REMOVE TOP OR BOTTOM COVERS. NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSON-
NEL.
À PRÉVENIR LE CHOC ÉLECTRIQUE
N'ENLEVEZ PAS LES COUVERCLES. IL N'Y A
PAS DES PARTIES SERVICEABLE À
L'INTÉRIEUR. TOUS REPARATIONS DOIT ETRE
FAIRE PAR PERSONNEL QUALIFIÉ SEUL-
MENT.
Macro-Tech MA-5002VZ Power Amplifier
IMPORTANT
The MA-5002VZ amplifier requires Class 2
output wiring.
MAGNETIC FIELD
CAUTION! Do not locate sensitive high-gain
equipment such as preamplifiers or tape decks
directly above or below the unit. Because this
amplifier has a high power density, it has a
strong magnetic field which can induce hum
into unshielded devices that are located nearby.
The field is strongest just above and below the
unit.
If an equipment rack is used, we recommend
locating the amplifier(s) in the bottom of the
rack and the preamplifier or other sensitive
equipment at the top.
WATCH FOR THESE SYMBOLS:
The lightning bolt triangle is used to alert the
user to the risk of electric shock.
The exclamation point triangle is used to alert
the user to important operating or maintenance
instructions.
Operation Manual