Siemens SCALANCE X320-3LD FE Operating Instructions Manual page 5

Further documentation
For help on configuration and diagnostics using Web-based management, the CLI command
line interface, or SNMP, refer to the following documentation:
● Configuration Manual SCALANCE X-300 SCALANCE X-400
This configuration manual is available on the following media:
– On the supplied CD
– In 5 languages on the Internet on the pages of Siemens Automation Customer
● SIMATIC NET - Industrial Ethernet Network manual
This manual is available on the following media:
– On paper under order numbers:
– In German and English on the Internet on the pages of Siemens Automation Customer
If you have questions on the use of SIMATIC NET products, please contact your Siemens
sales partner.
Standards and approvals
The devices of the SCALANCE X-300 product line meet the requirements for the CE mark.
For more detailed information, refer to section Approvals, certificates, standards (Page 223).
Integration in STEP 7 projects
The current GSDML file must be used for integration in STEP 7 V5.4 SP5 projects. This
applies to all products covered by these operating instructions.
You can obtain the relevant GSD file from the Internet at:
46183514 (http://support.automation.siemens.com/WW/view/en/46183514)
You will find the file for the firmware update V3.3.1 for X-300 under entry ID "46183538".
SIMATIC NET glossary
Explanations of many of the specialist terms used in this documentation can be found in the
SIMATIC NET glossary.
SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20
Support under the following entry ID:
19625108 (http://support.automation.siemens.com/WW/view/en/19625108)
- English version: 6GK1 970-1BA10-0AA1
- German version: 6GK1 970-1BA10-0AA0
Support under the following entry ID:
27069465 (http://support.automation.siemens.com/WW/view/en/27069465)
Preface
5